User Manual

E-113
Advanced programmings and registrations
Program code for <Currency exchange> key.
Description Selection Program code
Dene foreign currency symbol (0, 1, 2, 3, or 4). See “Setting symbol
characters” on page E-87. Setting “0” denes the local currency.
0 to 4
B
D7
Dene foreign currency totalizer number. (0, 1, 2)
(Totalizer 1 is dened if “0” is set)
0, 1 or 2
B
D6
Roundings
Round o󰀨 = 0, Cut o󰀨 = 1, Round up = 2
0, 1 or 2
B
D5
Must be “0”.
0
º
D4
ADD (decimal point position)
0. = 0, 0.0 = 1, 0.00 = 2, 0.000 = 3
0 to 9
B
D3
Symbol for decimal point
a
Point = 0
Comma = 1
B
D2(a+b)
e.g.) for 1,234.56
D2 = 0+0
Symbol for separator
b
Comma = 0
Point = 4
Must be “0”
0
º
D1
Program code for <Arrangement> key
Description Selection Program code
Process numeric entry as programmed arrangement number. No = 0
Yes = 1
B
D7
Arrangement program number. Program number
B to B
D6 to D1
Program code for <Multiplication> <Multiplication for> keys
Description Selection Program code
Multiplication procedure
! Quantity × Amount, @ Amount × Quantity
! = 0
@ = 1
B
D6
Roundings: Round o󰀨 = 0, Cut o󰀨 = 1, Round up = 2 0, 1, or 2
B
D5
Must be “0000” 0000
ºººº
D4 D3 D2 D1
Program code for <Tax shift> key
Description Selection Program code
Taxable status (01 ~ 04) (Taxable 1 if “00” is set) 01 to 04
BB
D8 D7
Must be “000000” 000000
ºººººº
D6 D5 D4 D3 D2 D1