User Manual

E-118

Advanced programmings and registrations

Programming auto operation of <Arrangement>

By using allocated <Arrangement> key, programmed operations are performed

automatically just by pressing <Arrangement> key. The following explains to set

the automatic operations.

Step Operation

1 Turn the Mode switch to PGM position and select [System

Setting] then press F key.

▪▪▪▪▪

2 Enter 3 and press o key to set the register in the

programming mode.

3 Enter 4- digit record number followed by 38. The “38” is the

identication code for arrangement programming. If you en-

ter “0000”, the register searches a vacant record number.

Then press o key.

000038o

This example is for searching a vacant ar-

rangement program number.

4 Press <Arrangement> key.

5 Input 6-digit arrangement table number and press F

key.

BBBBBBF

(Arrangement no.)

6 Input keys you wish to program automatic operations.

12x50!F

For programming to register a dozen of •0.50

dept. 01 item.

7 Press <Arrangement> and o keys to complete the

program.

<Arrangement>o