User Manual

ManualsBrandsCasio ManualsCash registersSR-C4500

http://web.casio.com/ecr/app/

Quick Start Guide

1. To set memory protection bat-

teries

To prevent losing all your settings and sales data, we

strongly recommend that you set the memory protection

batteries before you use the cash register and replace

them at least once a year.

1. Remove the printer cover by lifting it up.

2. Open the platen arm of the receipt printer (on the left)

by lifting it up.

3. Remove the battery compartment cover.

4. Note the (+) and (–) markings in the battery compart-

ment. Load a set of two new “AA” type alkaline

batteries so that their plus (+) and minus (–) ends are

facing as indicated by the markings.

5. Replace the battery compartment cover.

Important:

These batteries protect information stored in your

cash register’s memory when there is a power

failure or when you unplug the cash register. Be

sure to install these batteries rst.

Warning:

No battery is included in the accessories.

Never try to recharge the batteries.

Do not expose batteries to direct heat, let them

become shorted or try to take them apart.

Keep batteries out of the reach of small children.

If your child should swallow a battery, consult a

physician immediately.

There is a risk of explosion if the batteries are

replaced with improper type.

Preparations

Note: Please follow the steps described below.

Electronic Cash Register PCR-T2500/SR-S4000/SR-S920/SR-C4500

Electronic Cash Register can

be set by Smartphone Try it !

Preparations

Note: Please follow the steps described below.

2. To set receipt paper

1. Ensuring the paper is being fed from the bottom of the

roll, lower the roll into the space behind the printer.

2. Put the leading end of the paper over the printer.

3. Close the platen arm slowly until it locks securely.

Please push the position marked [PUSH HERE].

Warning:

Never touch the printer’s thermal head and the

platen.

Avoid the thermal paper from heat, humidity or

direct sunlight.

Keep your hands o󰀨 the paper cutter to avoid injury.

platen arm

platen

thermal head

paper cutter

4. Tear o󰀨 the excess paper.

3. To install journal paper

1. By the same procedure of setting receipt paper, set

journal paper on the journal printer.

2. Slide the leading end of the paper into the groove on

the spindle of the take-up reel and wind it onto the

reel two or three turns.

3. Replace the paper guide of the take-up reel.

4. Place the take-up reel into place behind the printer,

above the roll paper.

4. To turn the cash register on

1. Insert a Mode key that comes with the cash register in

the Mode switch and turn it to OFF position.

PGM

2. Plug in the power cord into an AC outlet.

QSG241*INC -E2

Summary of content (2 pages)

PAGE 1
Preparations Quick Start Guide Note: Please follow the steps described below. Electronic Cash Register PCR-T2500/SR-S4000/SR-S920/SR-C4500 2. 2. To set receipt paper Electronic Cash Register can be set by Smartphone Try it ! http://web.casio.com/ecr/app/ 1. Ensuring the paper is being fed from the bottom of the roll, lower the roll into the space behind the printer. Slide the leading end of the paper into the groove on the spindle of the take-up reel and wind it onto the reel two or three turns.
PAGE 2
Preparations Getting to know your cash register Note: Please follow the steps described below. 5. To set the language, date, time, tax rates and Bluetooth pairing 1. As soon as the power socket is plugged in, the display shows the language selection display. Choose language and country by using or keys then press F key. 4. 5. Press F key. Replace the printer cover. Access the following URL and install “CASIO ECR+” on a smartphone. http://web.casio.com/ecr/app/ 9.