Setup guide

51
In the Eighth record the following numbers should be programmed:
Program Code - 8000000C3 (no debit)
- 10000000C3 (with debit)
- 8100000C3 (gift card with no debit)
- 10100000C3 (gift card with debit)
NOTE: C = the COM port the PDC is connected to, either COM ports 2,3 or 4
In the Seventeenth record the following numbers should be programmed:
Program Code - 8000000C3 (no debit)
- 10000000C3 (with debit)
- 8100000C3 (gift card with no debit)
- 10100000C3 (gift card with debit)
NOTE: C = the COM port the ML/SL is connected to, either COM ports 2,3 or 4
If you have installed the Casio QT6046MCR magnetic card reader for the
purpose of swiping electronic payment cards (credit, debit & gift) you need to
program this record.
NOTE: When using the Casio card swipe, Record #8 for the DataCap PDC unit
must have the same numerical string as Record #17.
(0008-902)
(0017-902)
(0012-902)