Setup guide

Also, please perform a Flag Clear after making changes to I/O Parameters.

The Flag Clear operation sequence is on the following page.

FLAG CLEAR OPERATION on QT series:

1) Turn off the machine (power switch located on the left hand side of the

machine behind the operator display – see Fig 1 below for reference)

2) Hold down the DISPLAY ON/OFF button located on the bottom right hand

front side of the QT-6000 (refer to Fig 2 below for reference) and turn the

power ON

3) Release the DISPLAY ON/OFF key once the following display comes ON

4) Depress the OK button

5) When the FLAG CLEAR screen option appears, depress YES to complete

Flag Clear operation

Fig 1

Fig 2

Display

ON/OFF

Button