Specifications

R-28

Application System

2-1-5. Mode control

With the TE-7000S series, each clerk can be programmed to enable or disable operations

in the following modes:

– REF mode

– REG– mode

– REG mode

– X/Z mode

– Program 1 ~ 6 mode

– Manager mode

– Inline X/Z mode

– Inline auto program

– CF backup / restore mode

Also, each clerk can be programmed to enable or disable operations of every function key.

Though the terminal has no actual REG 2 mode, on the page 54 in the Clerk Control

function chapter of this manual, the manager control procedure is described.

Arrangement execution mode programmed in the arrangement key ignores the mode

control program by the clerk.

Please note that if a clerk want to operate an arrangement, he / she should allow to operate

arrangement function.

2-1-6. Operation prompt and error messages

The TE-7000S series displays messages to indicate the status of the terminal being

operated or programmed. These messages help to determine the status of the terminal or

the required subsequent action.

2-1-6-1. Operation prompt

Refer to the page 201 of this manual for details. These messages cannot be added, modified

or deleted.

2-1-6-2. Error messages

Refer to the page 198 ~ 200 of this manual for details. Error messages are displayed to

indicate that an error has occurred and a compulsory operation must be performed. All error

messages cannot be added, modified or deleted.

2-1-7. Printing control system

The following describes the control system for printing of receipts, the journal, validation,

slips and X/Z reports.

2-1-7-1. Receipt/journal print control during normal registration

Normally, the receipt and journal are printed to reflect the details of a registration as it is

performed, with the receipt being issued with the finalize operation. By using the

<RECEIPT ON/OFF> key, the receipt issuance status can be turned off to suspend printing

and issuance of receipts when so desired. Pressing the <RECEIPT ON/OFF> key twice

turns the receipt issuance status on or off, and when the receipt issuance status is On, the

icon “RECEIPT ON” appears. Switching receipt printing OFF does not affect printing of

the journal.

The following programming can be performed for receipt and journal printing: