Specifications

R-91
TE-7000S/8000F/8500F Reference Manual
3-2-3. IPL operation
If you select “CF card”, insert the CF card into the slot before
this step.
1. Select the appropriate method to loading IPL data and press
the <YES> key.
2. If you choose COM port or IN LINE port, select baud rate of
the IPL source device and press the <YES> key.
3. Press the <YES> key to proceed, in case of downloading via
inline, automatic ID definition is made by this timing. So
press the <YES> key terminal by terminal.
Source device activation except from CF card is necessary at
this timing.
In case of selecting via inline, refer to the “Auto-program”
section in this chapter.
4. After finishing IPL, machine initialization is necessary.
INITIAL PROGRAM LOAD
COM PORT
MODEM
CF CARD
IN LINE PORT
INITIAL PROGRAM LOAD
115200 bps
57600 bps
56000 bps
38400 bps
19200 bps
9600 bps
4800 bps
2400 bps
(using COM PORT)
(using INLINE PORT)
INITIAL PROGRAM LOAD
312 kbps
156 kbps
INITIAL PROGRAM LOAD
START IPL
Date 00-00-00
Time 12:34 00
ID Character MC #01
Check System Master
Check Cluster ID 0
R/J/Order Printer1 UP-350
R/J/Order Printer2 UP-350
Slip Printer SP-1300
OK? Yes
0.00
www.cashregisters.net