EN Digital Camera User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official CASIO Website at http://dc.casio.
Accessories As you unpack your camera, check to make sure that all accessories shown below are included. If anything is missing, contact your original retailer. USB-AC adaptor (AD-C54UC) Micro USB cable • Items actually included depend on the camera model you purchase.
Read this first! • The contents of this manual are subject to change without notice. • The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. • Any copying of the contents of this User’s Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD.
Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . .
Viewing Snapshots and Movies 47 Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . . . (Movie Editing) . . . 49 Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Zooming an On-screen Image . . . . . . .
Using the Camera with a Computer 78 Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . 78 Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Connecting the Camera to Your Computer and Saving Files . . . . . . . .
General Guide The numbers in parentheses indicate the pages where each item is explained. (4 (1 (3 (2 Strap hole (page 7) Monitor screen (pages 8, 13, 86) Microphone (page 42) Lens LED light ring (pages 38, 91) Sub LED light (pages 38, 91) Shutter button (page 28) Speaker [USB] port (pages 15, 18) [USB] port cover Operation lamp (pages 16, 19, 23, 28) Cover lock (page 25) Top cover (page 25) • To access the memory card, you need to remove the top cover (page 25).
Monitor Screen Contents and How to Change Them The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera. .
. PLAY Mode Movie icon (page 47) REC mode icon (page 23) Wireless LAN communication status (5 (4 (3 (2 (1 (page 61)/Airplane mode (page 72) Bluetooth communication status (page 61) Auto Send (page 73) Image sent (page 71) Battery level indicator (page 20) Protect indicator (page 54) Folder name-file name (page 84) Snapshot image size (page 45)/ Movie quality (page 41) ISO sensitivity Shutter speed/ Movie recording time (page 47) Date/time (pages 21, 89) Menu icon (pa
. Function On/Off Indication On Off Each touch of or toggles to the opposite setting.
Quick Start Basics What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following main functions. New Configuration Introducing a totally new shape for a camera. Simply open the cover for digital imaging with an elegant design. *See page 7 for more information. Beautiful Self-portraits The Make-up function helps to make perfect selfportraits easier than ever before.
Wireless Connection A simple operation sends images shot with the camera to a smartphone. *See page 57 for more information.
Using the Touch Panel The monitor screen of the camera is a touch panel. This means you can perform the following operations by touching the screen with your fingers. Monitor screen Touch Momentarily touching the screen with your finger. Touch the screen to select an icon or menu item, and to configure settings. You can zoom in and zoom out on a displayed image by tapping it twice in succession. Touch-and-hold Holding your finger against the screen.
Spread Holding your thumb and forefinger against the screen as you spread them out. Use spread to enlarge the screen image. Squeeze Holding your thumb and forefinger against the screen as you bring them together. Use squeeze to reduce the size of the screen image. IMPORTANT! • Never use a pointed or hard object to perform screen operations. Doing so can damage the screen. • The camera will have a hard time interpreting a screen operation made using your fingernails. Use the fleshy pad of your finger.
First, charge the battery prior to use. The camera has a built-in rechargeable lithium ion battery. The battery is not charged when you purchase the camera, so you will need to charge the camera before using it. You can use either of the two following methods to charge the battery. • USB-AC adaptor • USB connection to a computer (Using the included micro USB cable.) . To charge with the USB-AC adaptor While the camera is turned off, connect in the sequence shown below.
IMPORTANT! • A battery that has not been used for a long time and/or ambient temperature can cause charging to take longer than normal. These conditions may also cause the operation lamp to flash red. If this happens, refer to page 115. • Opening the camera while the USB-AC adapter is connected will start up the camera on battery power. Because of this, charging will stop. • The USB-AC adaptor will become warm during charging. This is normal and does not indicate malfunction.
USB Cable Connection Precautions • When connecting the USB cable to the camera, make sure that the cable connector and monitor screen panel are oriented correctly as shown in the illustration below. Making sure the u mark on the USB cable connector is facing the top of the camera, plug it in. The operation lamp always initially light after charging starts. Even if the battery is already fully charged, the lamp will light momentarily.
. To charge using a USB connection to a computer While the camera is turned off, connect in the sequence shown below (, ). Computer (power turned on) [USB] port USB port USB Micro USB cable (included with camera) Connect the cable so the u mark on the small (micro USB) connector is facing upwards. • If the camera is turned on, close its cover to turn off before connecting to a computer.
Operation Lamp Operation Lamp Status Description Lit Red, (Lit/Flashing Amber) Charging Flashing Red Abnormal ambient temperature, charging taking abnormally long, or battery problem (page 115) Off, (Lit Green) Charging complete Operation lamp • The information in parentheses in the above table shows the lamp status while the camera is turned on during charging.
Checking the Current Battery Level As battery power is consumed, a battery indicator on the monitor screen indicates its current level as shown below. Remaining Power High Indicator Color Low * Battery Indicator White * * White * * Red * Red indicates battery power is low. Charge the battery as soon as possible. Recording is not possible when is indicated. Charge the battery immediately. • The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode.
Configuring Basic Settings the First Time You Turn On the Camera The first time you turn on the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images. IMPORTANT! • A screen for language selection will not appear in step 2 of the procedure below if you purchased a camera intended for the Japanese market.
10. Touch “OK”. 11. Select the complexion setting you want. • You can select one of seven skin tone patterns. 12. Touch “OK”. • You will be able to change the complexion setting later, if you want. See page 36 for details. If you make a mistake configuring display language, date, or time settings with the above procedure, refer to the following pages for information about how to correct the settings.
Turning Power On and Off . To turn on the camera Open the camera. This will automatically turn on the camera (indicated by the operation lamp lighting green) and enter the REC mode. IMPORTANT! • The camera will not start up if you open it while it is being charged by a computer. A USB connection will be established between computer and camera (page 18). Operation lamp . To enter the REC mode and PLAY mode To enter the PLAY mode In the REC mode, touch “ ” (PLAY).
Preparing a Memory Card Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available memory card for greater capacity. The camera does not come with a memory card. Images recorded while a memory card is loaded are saved to the memory card. When no memory card is loaded, images are saved to built-in memory. • For information about memory card capacities, see page 125.
To load a memory card 1. While sliding the cover lock in the direction indicated by the arrow, open the top cover. Top cover Cover lock • Remove the sticker before using the camera for the first time after purchasing it. 2. Load a memory card. Positioning the memory card as shown in the nearby illustration insert it into the camera’s memory card slot and press until you hear it click into place. Front Front 3. Replace the top cover. Back After hooking the cover at point , close the cover.
IMPORTANT! • Never insert anything besides a supported memory card (page 24) into the memory card slot. • Should water or any foreign object ever get into the card slot, immediately turn off the camera, and contact your retailer or nearest CASIO authorized service center. . To replace the memory card Press the memory card and then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one.
To Shoot a Snapshot Your camera has a variety of different recording modes to suit various shooting objectives (page 35). This section explains general shooting procedures using the auto recording mode. Selecting an Auto Recording Mode Your camera has an Auto Recording Mode. 1. Open the camera to turn it on. 2. Flick the screen upwards. 3. Touch “Auto” to select the auto recording mode. To shoot a snapshot 1. Position the camera so it is easy to grasp and so the shutter button is easy to press.
3. Half-press the shutter button to focus the image. Shutter button When focus is complete, the camera will beep, the operation lamp will light green, and the focus frame will turn green. Half-press Press lightly until the button stops. Operation lamp Focus frame Beep, beep (Image is in focus.) When you half-press the shutter button, the camera automatically adjusts exposure and focuses on the subject it is currently pointed at.
. If the image does not focus... If the focus frame stays red and the operation lamp is flashing green, it means that the image is not in focus (because the subject is too close, etc.). Re-point the camera at the subject and try to focus again. . Shooting with Auto “Focus lock” (page 29) is the name of a technique you can use when you want to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen. .
Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 47. 1. Touch “ 2. Drag left or right across the screen image to scroll through the snapshots. ” (PLAY) to enter the PLAY mode. This will display one of the snapshots currently stored in memory. • If “Type 2” is selected for the “Review” setting (page 46), touch the Review image on the monitor screen.
Deleting Snapshots and Movies You can use either of the two delete operations described below. • Deleting a file by flicking it on the playback screen This can be used to delete a single file. • Deleting files using the PLAY mode “ ” (Menu) You can delete all files, delete selected files, or delete a single file. IMPORTANT! • A file (image) delete operation cannot be undone. Deleting a File by Flicking It on the Playback Screen This procedure can be used to delete a single file. 1.
4. Touch the image you want to delete. Touching an image causes a check mark to appear in its check box. • To clear (deselect) a check box, touch its image. 5. After selecting all of the images you want to delete, touch “OK” or “ ”. 6. Touch “Delete”. This will delete the selected images. • To cancel the delete operation, touch “Cancel”. NOTE • You can also select images and delete them while the image menu screen is displayed (page 50). . Deleting a Single File 1.
Snapshot Shooting Precautions Operation • If unwanted light is shining onto the lens, shade the lens with your hand when shooting an image. Monitor Screen when Shooting Snapshots • Subject brightness conditions can cause monitor screen response to slow and can cause digital noise in the monitor screen image. • The image that appears on the monitor screen is for image composition. The actual image will be recorded in accordance with the currently selected recording mode (page 35).
Shooting Settings Flick from the edge of the screen in the direction of the arrows. Selfie timer*1 (page 37) Make-up*2 (page 36) LED light (page 38) *1 “Delete” operations will be activated Recording Mode*3 (page 35) when in the playback mode. *2 There are cases in which this item will not be displayed depending on the shooting mode selected. *3 “Send Image” operations will be activated when in the playback mode.
Recording Images Selecting a Recording Mode The camera has a variety of different recording modes. 1. In the REC mode, flick the screen upwards. 2. Touch the icon of the recording mode you want to use. This enters the selected recording mode. Auto Standard Auto recording mode. This is the mode normally used for shooting (page 27). Make-up Makes it easier to shoot beautiful portraits. Skin tone and texture settings can be selected to suit shooting conditions (page 36).
Recording Beautiful Portraits (Make-up) Make-up enables adjustment of human skin tone hues and texture, and softening of facial shadows caused by harsh sunlight for better looking portraits. 1. In the REC mode, flick the screen rightwards. This displays the Make-up setting screen. 2. Touch the item whose setting you want to change, and then adjust it. • There are other setting items that are not shown on the display. To display hidden items, drag your finger on the screen in a circle.
4. Press the shutter button to shoot. NOTE • Make-up mode setting items are different from the settings that can be configured in other recording modes. Shooting a Self-portrait (Selfie timer) 1. Flick the screen downwards. 2. Drag “ ” (Selfie Timer) to specify the selfie timer countdown duration. The camera will shoot an image when the countdown reaches zero. • You can set a selfie timer countdown duration within the range of two to ten seconds. The further you drag, the longer the duration.
Using the LED Light (LED) Use the LED light when shooting where lighting is dim. The effectiveness of the LED light is reduced the further you are from the subject. 1. Flick the screen leftwards. 2. Touch the item whose setting you want to change. Setting REC Screen Description Icon Display On LED always lights when shooting. Off LED never turns on. Auto The LED light turns on automatically when surroundings are dark.
Shooting with Zoom Your camera is equipped with various types of zoom: SR Zoom and digital zoom. SR Zoom Applies super resolution technology to suppress image deterioration. Digital zoom A digital process is used to enlarge the center of the image, so there is deterioration of image quality. 1. Perform the required screen operation to change the zoom factor as desired. Zoom in: Spread Zoom out: Squeeze Wide Angle Telephoto Wide Angle : Reduces the size of the subject and broadens the range.
. Zoom Factor • The image deterioration point depends on the image size (page 45). Image Size Undeteriorated Zoom Limit Maximum Zoom Factor 1:1 (8M) 1.5X 4.0X 4:3 (12M) 1.5X 4.
Recording Movie To record a movie The following procedure explains how to record a movie. Specifying Movie Image Quality 1. In the REC mode, touch “ 2. Drag the screen image upwards and downwards until you find “Movie Quality”, and then touch to select it. 3. Touch the quality setting you want. 4. ” (Menu). Movie quality Movie Size (Pixels) 1024 1024x1024 480 480x480 To close the menu screen, touch “ button. ” (Menu) or press the shutter Shooting the movie 1. Flick the screen upwards.
Minimizing the Effects of Camera Movement during Movie Recording You can configure the camera to minimize the effects of camera movement during movie recording. IMPORTANT! • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. • Movie recording also records audio. Note the points below Microphone when shooting a movie. – Take care that the microphone is not blocked by your fingers, etc.
Advanced Recording Settings The following are menu operations you can use to configure various camera settings. Using the REC Menu . Example Menu Screen Operation 1. In the REC mode, touch “ ” (Menu). This will display the menu screen. • Menu contents are different in the REC mode and PLAY mode. 2. Drag upwards and downwards until you find the item whose setting you want to change. 3. Touch the item. 4. Configure the setting of the item in accordance with the screen contents.
Using Touch Shutter (Touch Shutter) Procedure Enter the REC Mode * “ ” (Menu) * Touch Shutter You can use the procedure below to shoot a snapshot. 1. Turn on the function (page 10). 2. Point the camera at the subject. 3. When you want to shoot, touch the monitor screen. The camera automatically comes into focus and then shoots. • You can still use the shutter button to shoot even when On is selected for Touch Shutter.
Changing the Image Size (Image Size) Procedure Enter the REC Mode * “ ” (Menu) * Image Size This setting can be used to configure snapshot image size. Setting Image Size (Pixels) REC Screen Description Icon Display 1:1 8M (2976x2976) Shoots a 1:1 square size image. 4:3 12M (4000x3000) Shoots a 4:3 rectangular image. . Pixels and image size A digital camera image is a collection of small Pixel dots called “pixels”. The more pixels there are in an image, the more detail there will be.
Movie Image Quality Settings (Movie Quality) Procedure Enter the REC Mode * “ ” (Menu) * Movie Quality This setting can be used to configure movie image quality and recording mode settings. For information about movie image quality settings, see page 41. Turning on Image Review (Review) Procedure Enter the REC Mode * “ ” (Menu) * Review While Review is turned on, the camera will display an image immediately after it is recorded. Type 1 Displays a full-screen view of the image for about one second.
Viewing Snapshots and Movies Viewing Snapshots See page 30 for the procedure for viewing snapshots. NOTE • Flicking the screen upwards while in the PLAY mode performs an “Send Image” operation. Flicking downwards performs a “Delete” operation. Viewing a Movie 1. Touch “ 2. Drag left or right across the screen image to scroll through the movies until the one you want is displayed. ” (PLAY) to enter the PLAY mode. Image quality Movie icon: Movie recording time 3.
Movie Playback Controls Pause/Play Touch “ Fast forward/ Fast reverse During playback, touch “ ” (fast reverse) or “ ” (fast forward). • Each touch of either button increases the speed of the fast forward or fast reverse operation. • To return to normal playback speed, touch “ ”. ” (pause) or “ ” (play). Stop playback During playback, touch “ Volume adjustment During playback, touch “ ” and then drag the volume bar to the desired level.
Editing a Movie on the Camera (Movie Editing) The Movie Editing feature lets you cut out a specific part of a movie. 1. Enter the PLAY mode and then start playback of the movie you want to edit. 2. When playback reaches the location where you want to cut, touch “ to pause. 3. Touch “ 4. Touch the option that specifies what you want to cut. 5. ” ”. Previous Cut Cuts everything from the beginning of the movie up to the current location.
Viewing the Image Menu The image menu shows multiple images on a single screen. 1. In the PLAY mode, squeeze your fingers on the screen. This displays the image menu. • Drag upwards or downwards to scroll to the next page of images. • To view the normal (single image) display mode, touch the image your want to view. • In the case of a movie, the first image in the movie is displayed. • A question mark (?) will be displayed for images that cannot be displayed for some reason.
Sending a Selected Camera Image to a Smartphone (Send Selected Image) You can select a snapshot and/or movie file in camera memory and send it to a smartphone. 1. In the PLAY mode, drag left or right across the screen image to scroll through files until you find the one you want to send. 2. Flick the screen upwards. 3. Touch “Send”. This will send the selected image. IMPORTANT! • Wireless connection settings must be configured to send selected images from the camera to a smartphone.
Other Playback Functions (PLAY) The following are menu operations you can use to configure various camera settings. Using the PLAY Menu . Example Menu Screen Operation 1. In the PLAY mode, touch “ ” (Menu). This will display the menu screen. • Menu contents are different in the REC mode and PLAY mode. 2. Touch the item whose setting you want to change. 3. Configure the setting of the item in accordance with the screen contents. .
Cropping a Circular Image (Circular Cropping) Procedure Enter the PLAY Mode * “ ” (Menu) * Circular Cropping Creates a circular cropped image of the type that is popular on social networking services. NOTE • This function cannot be with a 4:3 image. • The aspect ratio of cropped images is 1:1 (1536x1536 pixels), which is equivalent to 2M size. The image is not actually circular. A background is added to make the image appear circular.
Protecting a File Against Deletion (Protect) Procedure Enter the PLAY Mode * “ ” (Menu) * Protect You can protect images to prevent them from being deleted. • A protected image will be indicated by “ ”. All Files On Protects all files. All Files Off Unprotects all files. Select Protects and unprotects specific files. Drag upwards or downwards to display the image you want to protect. Touch an image to be protected, and “ ” will appears on the image.
Rotating an Image (Rotation) Procedure Enter the PLAY Mode * “ ” (Menu) * Rotation 1. Drag left or right to display the image you want to rotate. 2. Touch “ ”. This will rotate the image 90 degrees to the left. 3. When the image is in the orientation you want, touch “ ”. NOTE • Note that this procedure does not actually change the image data. It simply alters how the image is displayed on the camera’s monitor screen. • An image that has been protected or zoomed cannot be rotated.
Cropping a Snapshot (Trimming) Procedure Enter the PLAY Mode * Display snapshot * “ ” (Menu) * Trimming You can crop a snapshot to trim parts you do not need, and save the result in a separate file. The original snapshot is also retained. 1. Drag left or right to display the image you want to trim. 2. Select the aspect ratio of the saved image. For a 4:3 aspect ratio image, you can select either of two trimmed image aspect ratio: 4:3 or 1:1 (square).
Connecting the Camera with a Smartphone (Wireless Connection) Controlling Your Camera with a Smartphone Your camera has both Bluetooth® wireless technology and wireless LAN capabilities built in. After establishing a wireless connection with a smartphone, you can perform the operations described in the table below. Requires installation of the EXILIM Connect app on your smartphone. • Your camera can connect using Bluetooth wireless technology with a smartphone that supports Bluetooth low energy technology.
With this function: You can do this: Send to phone Send snapshots and movies recorded with your camera to your smartphone. After sending an image to a smartphone, you can then upload it from the smartphone to a social networking service (page 67). View on phone View snapshots stored in camera memory on a smartphone, and copy snapshots and movies to a smartphone for viewing. You can also view snapshots and movies in camera memory on a computer, and copy them to a computer (page 68).
. About EXILIM Connect For detailed information about EXILIM Connect, refer to the EXILIM Connect User’s Guide (which you can download at the website below). http://www.exilim.com/manual/ • Note that to view the EXILIM Connect User’s Guide, you will have to install Adobe Reader. Consult CASIO authorized service center if you are unable to open to display the PDF format User’s Guide. • Note that EXILIM Connect User’s Guides may not be available in all languages.
Using a Wireless Mode Your camera has a variety of different wireless modes. Select the wireless mode that suits your specific requirements. 1. Touch “ 2. Touch “Wireless Mode”. ” (Menu). This displays a wireless mode screen. 3. Touch the wireless mode you want. Send to phone Select to view images you shoot with the camera on a smartphone (pages 67, 68). Pairing Select this mode to establish a Bluetooth wireless technology connection between the camera and a smartphone (page 63).
. Wireless Connection Icons After you configure camera and smartphone connection settings, the icons below will appear on the camera screen to indicate the current communication status. Semitransparent Pairing is complete, but there is no Bluetooth wireless technology connection. Opaque Pairing is complete, and there is a Bluetooth wireless technology connection. Semitransparent Wireless LAN is enabled, but there is no connection. Opaque Wireless LAN connected.
Installing the EXILIM Connect App on Your Smartphone . Android terminal Install EXILIM Connect from the EXILIM app site at the URL provided above. . iPhone (iOS) Install EXILIM Connect from the EXILIM app site at the URL provided above.
Establishing a Wireless Connection for the First Time The first time you establish a wireless connection between the camera and a smartphone, you need to use the procedure below to configure wireless connection settings. This operation is required for the first connection only. . Smartphone that supports Bluetooth low energy technology Connecting the camera to a smartphone using Bluetooth wireless technology (pairing) makes it simple to configure wireless connection settings.
NOTE • After the camera is paired, Bluetooth wireless technology operation will consume battery power even when the camera it turned off. Because of this, it is recommended that you charge the camera’s battery before you plan to use it. . Smartphone that does not support Bluetooth low energy technology Configure smartphone wireless LAN connection settings (input the camera SSID and password). 1. Touch “Wireless Mode”. 2. Touch “Shoot with phone”. 3. Touch “Start”.
Using a Smartphone as a Camera Remote Controller (Shoot with phone) This function lets you remotely shoot a snapshot or movie with the camera using a smartphone. You also can perform remote zoom, self-timer, and other operations as well. NOTE • When using a smartphone to shoot with the camera, you can add location information obtained by the smartphone to the image data. For information about how to do this, refer to the EXILIM Connect User’s Guide (page 59). . Bluetooth Wireless Technology Connection 1.
. Cannot Connect with Bluetooth Wireless Technology 1. Touch “Wireless Mode”. 2. Touch “Shoot with phone”. 3. Touch “Start”. • If there is a wireless LAN connection between the smartphone and camera, advance to step 5 of this procedure. 4. For the smartphone’s Wi-Fi settings, select the SSID displayed on the camera and establish a wireless LAN connection between the camera and smartphone. 5. On the smartphone, start up the “EXILIM Connect” app. 6.
Sending a Snapshot or Movie File from Camera Memory to a Smartphone (Send Selected Image) You can select one more snapshot and/or movie file in camera memory and send it to a smartphone. You can select up to 100 files, totaling no more than 500MB for a single send. After sending an image to a smartphone, you can then upload it to a social networking service. 1. Touch “Wireless Mode”. 2. Touch “Send to phone”. 3. Touch “Send Selected Image”. 4. Touch the image you want to send to the smartphone.
Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on phone) You can connect the camera to a smartphone over wireless LAN to view and download snapshots and movies in camera memory on up to eight connected smartphones. You can also view snapshots and movies in camera memory on a computer, and copy them to a computer. A smartphone does not need to have the EXILIM Connect app installed in order to access camera images using this function. 1. Touch “Wireless Mode”. 2.
Sharing Snapshots with an Unpaired Smartphone (One Time Share) Share selected snapshots for viewing on smartphones that are not paired with the camera. With One Time Share, you can send selected snapshots to a smartphone that is Bluetooth paired, which then uploads them to a “Scene Server.” To upload snapshots to the Scene sever, you need to have the Scene app installed on the smartphone that is paired with the camera. • Your smartphone must have Internet access to use this function.
NOTE • You can select up to 100 files, totaling no more than 500MB, for a single share operation. • When a large number of images are selected, it will take some time to send them to the smartphone and/or upload them to the Scene server. • To discontinue sharing of a set of images, use the Scene app to configure the settings required to stop sharing. • One Time Share cannot be used if there is insufficient free space on the memory card.
Sending Images from the Camera to a Smartphone as They are Recorded (Auto Send) Camera settings can be configured to send images automatically over a wireless connection to a smartphone after they are recorded. Setting Description On Automatically sends images to the smartphone after they are shot. Off Auto Send disabled. 1. Touch “Wireless Mode”. 2. Touch “Wireless settings”. 3. Touch “Auto Send”. 4. Turn on the function.
Configuring Wireless Connection Settings This section explains wireless mode operations and setting items. 1. Touch the “Wireless Mode”. This will display the wireless mode screen. • Touching “ ” or pressing the shutter button will return to the screen that was displayed before the wireless mode screen. 2. Touch “Wireless settings”. This will display the wireless setting screen. 3. Touch the item you want to configure. 4. Change the setting of the selected item.
Sending Images from the Camera to a Smartphone as They are Recorded (Auto Send) Procedure Wireless Mode * Wireless settings * Auto Send See page 71 for details. Resizing Snapshots before Sending Them to a Smartphone (Resize before send) Procedure Wireless Mode * Wireless settings * Resize before send This feature can be use to resize snapshots before they are sent to a smartphone using “Shoot with phone” or “Send to phone”. On Images are resized before being sent.
Add Location Info to Snapshots (Location info) Procedure Wireless Mode * Wireless settings * Location info You can enable the setting below to have the smartphone acquire and record location information (latitude and longitude) when you shoot a snapshot with the camera. Then when you send the snapshot to the smartphone, the location information will be added to it. Note that location information is not added to movies.
Changing the Camera Password for Wireless LAN Connection (WLAN password) Procedure Wireless Mode * Wireless settings * WLAN password Use procedure to change the password you used when establishing a wireless LAN connection between the camera and a smartphone. IMPORTANT! • Before changing the wireless LAN password, unpair the camera from its paired smartphone (page 76). 1. Touch the password digit you want to change. 2. Touch “ 3. When the password is the way you want, touch “OK”.
Unpairing the Camera from a Smartphone (Unpairing) Procedure Wireless Mode * Wireless settings * Unpairing Unpairs the camera from a smartphone. To use the camera with a different smartphone, first unpair it from the current smartphone. NOTE • When unpairing, be sure also to perform the unpairing operation on the smartphone as well. For details, refer to the EXILIM Connect User’s Guide (page 59). • Unpairing the camera from a smartphone will result in all pending unsent images to remain unsent.
Printing Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer You can use a printer equipped with a memory card slot to print images directly from a memory card. For details, see the user documentation that comes with your printer. Printing with a Computer After transferring the images to your computer, use commercially available software to print.
Using the Camera with a Computer Things you can do using a computer... You can perform the operations described below while the camera is connected to a computer. Save images to a computer and view them there • Save images and view them manually (USB connection) (pages 79, 82). Play back and edit movies • You can play back movies (pages 81, 83). • To edit movies, use commercially available software as required. The procedures you need to perform are different for Windows and the Macintosh.
Viewing and Storing Images on a Computer You can connect the camera to your computer in order to view and store images (snapshot and movie files). Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card. Doing so can cause problems with the camera’s image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity.
4. Double-click “Removable Disk”. • Your computer recognizes the memory card loaded in the camera (or built-in memory if there is no card) as a removable disk. 5. Right-click the “DCIM” folder. 6. On the shortcut menu that appears, click “Copy”. 7. Windows 10, Windows 8.1 users: Click “Documents”. Windows 7 users: Click “Start” and then “Documents”. • If you already have a “DCIM” folder in “Documents”, the next step will overwrite it.
. Movie Playback Precautions • To play back a movie, first save it to your computer and then double-click the movie file. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc. • Proper movie playback may not be possible on some computers. If you experience problems, try the following. – Quit any other applications you have running, and stop resident applications.
Connecting the Camera to Your Computer and Saving Files Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card. Doing so can cause problems with the camera’s image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.
3. Double-click the camera’s drive icon. The camera’s operation lamp will light green at this time. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera’s built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using. 4. Drag the “DCIM” folder to the folder to which you want to copy it. 5. After the copy operation is complete, drag the drive icon to Trash. 6.
Files and Folders The camera creates a file each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. • For details about how folders are organized in memory, see “Memory Folder Structure” (page 85). Name and Maximum Number Allowed Example Each folder can contain up to 9999 files named CIMG0001 through CIMG9999. The extension on the file name depends on the file type.
Memory Card Data The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations. • Transferring this camera’s DCF-compliant images to another manufacturer’s camera and view them. • Printing this camera’s DCF-compliant images on another manufacturer’s printer.
Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. For information about menu operations, see page 43. Adjusting Monitor Screen Brightness (Screen) Procedure “ ” (Menu) * Setup * Screen You can use the following procedure to change the brightness of the monitor screen.
Locking the Screen (Screen Lock) Procedure “ ” (Menu) * Setup * Screen Lock Normally, the arrangement of icons and the images displayed on the camera monitor screen change automatically in accordance with the camera’s orientation. Selecting “On” for the “Screen Lock” setting will lock the screen so its contents do not readjust to match the camera orientation. Specify the Shutter Sound Procedure “ ” (Menu) * Setup * Shutter Sounds You can select from among two shutter sounds.
Configuring World Time Settings (World Time) Procedure “ ” (Menu) * Setup * World Time Setting a Travel Destination You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe. 1. Touch “Destination”. • To change the geographic area and city for the time where you normally use the camera, select “Home”. 2. Touch “City”.
Setting the Camera’s Clock (Adjust) Procedure “ ” (Menu) * Setup * Adjust 1. Touch the value you want to change (year, month, day, hour, minute). 2. Touch “ ” or “ selected value. ” to change the currently • You can specify a date from 2001 to 2049. • Be sure to select your Home City (page 88) before setting the time and date.
Specifying the Display Language (Language) Procedure “ ” (Menu) * Setup * Language . Specify the display language you want. 1. On the menu screen, touch “Setup”. 2. Touch “Language”. 3. Drag upwards and downwards until you find the language you want, and then touch to select it. • Camera models sold in certain geographic areas may not support display language selection.
Displaying a Startup Screen at Power On (Startup) Procedure ” (Menu) * Setup * Startup “ Selecting “On” for Startup causes a built-in startup screen to appear on the monitor screen whenever the camera is turned on. Specifying LED Light Operation (Illumination) Procedure ” (Menu) * Setup * Illumination “ The LED lights when you turn on the camera and synchronized with the Selfie Timer (page 37). On Lights when the camera is turned on and with the Selfie Timer count.
Resetting the Camera to Factory Defaults (Reset) Procedure “ ” (Menu) * Setup * Reset See page 118 for details about the camera’s factory default settings. The settings below are not reset. World Time settings, clock settings, date style, screen language, WLAN password NOTE • Resetting the camera does not unpair it from a smartphone (page 63). • Resetting the camera causes the Airplane Mode setting (page 72) to become Off.
Appendix Safety Precautions *DANGER This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury. *WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication.
*DANGER • Failure to observe any of the following precautions creates the risk of battery overheating, fire, and explosion. – Never use or leave the battery near open flame. – Do not expose the battery to heat or fire. – Make sure the battery is oriented correctly when charging it. – Never carry or store the battery together with items that can conduct electricity (necklaces, pencil lead, etc.).
*WARNING . Smoke, abnormal odor, overheating, and other abnormalities • Continued use of the camera while it is emitting smoke or strange odor, or while it is overheating creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Close the camera to turn off power. $ * If the camera will not turn off for some reason, hold down shutter button for about ten seconds. 2.
*WARNING • Never touch the power plug while your hands are wet. Doing so creates the risk of electric shock. • Should the power plug become damage, contact your retailer or nearest CASIO authorized service center. • Do not use the USB-AC adapter in areas where liquids* might spill on them. Liquids create the risk of fire and electric shock. * Liquids: Water, sports drinks, seawater, animal or pet urine, etc. • Do not place a flower vase or any other liquid container on top of the USB-AC adapter.
*WARNING . Dropping and Rough Treatment • Continued use of the camera after it is damaged by dropping or other rough treatment creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Close the camera to turn off power. - * If the camera will not turn off for some reason, hold down shutter button for about ten seconds. 2. If you are using the USB-AC adapter to power the camera, unplug the power plug from the power outlet. 3.
*WARNING + • On a crowded train or any other crowded location where there is the possibility of being in the vicinity of a person wearing a cardiac pacemaker, stop using the wireless functions (Remote Capture, image transfer, wireless image viewing, etc.) of this camera, or turn off the camera. Radio waves emitted by the camera’s wireless function may affect pacemaker operation.
*CAUTION . USB-AC Adapter • Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make sure you observe the following precautions. – Never cover the USB-AC adapter with a quilt, blanket, or other cover while it is in use, and do not use it near a heater. Doing so can interfere with heat radiation and cause the area around them to become hot. – Do not use detergent when cleaning the USB-AC adapter or the USB cable (especially the plugs and jacks).
*CAUTION . Locations To Be Avoided • Never leave the camera in any of the following types of locations. Doing so creates the risk of fire and electric shock. – Areas subject to large amounts of humidity or dust – Food preparation areas or other locations where oil smoke is present – Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed vehicle parked in the sun, or other areas subject to very high temperatures - .
Precautions During Use . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory.
. Lens • Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction. • You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lenses, and does not indicate malfunction of the camera. . Caring for your camera • Never touch the lens with your fingers.
. Precautions During Wireless Function (Wireless LAN, Bluetooth Wireless Technology) Use • Operation of this product may affect or may be affected by nearby devices that use wireless functionality. • This product is subject to the Export Administration Regulations (EAR) of the United States, and so it cannot be exported to or brought into countries that fall under U.S. Embargoes and Other Special Controls.
. Other Precautions The camera becomes slightly warm during use. This is normal and does not indicate malfunction. . Copyrights Except for your own personal enjoyment, unauthorized use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your own personal enjoyment.
Note that trademark ™ and registered trademark ® are not used within the text of this manual. • microSDXC Logo is a trademark of SD-3C, LLC. • Windows, Windows 7, Windows 8.1, and Windows 10 are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. • Macintosh, Mac OS, QuickTime, and iPhone are trademarks of Apple Inc. • Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
. Open Source Software This product includes software that is licensed under the license conditions below. OpenVG 1.1 Reference Implementation Copyright (c) 2007 The Khronos Group Inc.
and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity.
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License.
within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License.
See the License for the specific language governing permissions and limitations under the License. Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner.
attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed a
8. Limitation of Liability.
Power Supply Charging . If the camera’s operation lamp starts flashing red... If the operation lamp starts flashing red during charging, it means that further charging is not possible for one of the reasons below. Perform the actions described below to correct the problem and then try charging again.
Battery Precautions • Operation provided by a battery under cold conditions is always less than operation under normal temperatures. This is due to the characteristics of the battery, not the camera. • Charge the battery in an area where the temperature is within the range of 15°C to 35°C (59°F to 95°F). Outside this temperature range charging can take longer than normal or even fail.
Using a Memory Card See page 24 for information about supported memory cards and how to load a memory card. . Using a Memory Card • If a memory card starts to behave abnormally during image playback, you can restore normal operation by reformatting it (page 91). However, it is recommended that you always take along multiple memory cards whenever using the camera far away from the home or office.
Reset Initial Default Settings The tables in this section show the initial default settings on menus that appear in the REC mode and PLAY mode when you reset the camera (page 92). • A dash (–) indicates an item whose setting is not reset or an item for which there is no reset setting. IMPORTANT! • Some menu items may not be available, depending on the recording mode being use. . REC Menu Wireless Mode – Movie Quality 1024 Touch Shutter On Review Type 2 L/R Flip Shot On Setup * See below.
. Setup Menu Screen Auto Date Style – Info Off Language – Screen Lock Off Startup Off Illumination On Format – Reset – Version – Smooth Skin 3 Make-up Art Off Skin Tone Brightening Dark Circles Remover On Face Brightness 0 Slim Face On Sculpt 0 Normal Mole Remover Off Tint Lighting Fresh Catch light On Shutter Sounds 1 Sounds Startup: On / Half Shutter: On / Shutter: On / Operation: On / Operation Vol: 3 / Playback Vol: 3 World Time – Adjust – .
When things don’t go right... Troubleshooting Problem Possible Cause and Recommended Action Power Supply Power does not turn on. 1)The battery of new camera is not charged. Charge the battery before using the camera. 2)The camera battery may be dead. Charge the battery (page 15). If this does not resolve the problem, contact your retailer or a CASIO authorized service center. The camera suddenly powers down.
Problem Possible Cause and Recommended Action The subject is out of focus in the recorded image. The image may not be focused properly. When composing the image, make sure the subject is located inside the focus frame. The LED light does not light. If the battery is dead, charge it (page 15). Camera powers down during Selftimer countdown. The battery may be dead. Charge the battery (page 15). There is digital noise in images.
Problem Possible Cause and Recommended Action Playback The color of the playback image is different from what appears on the monitor screen when shooting. Sunlight or light from another source may be shining directly into the lens when you are shooting. Position the camera so sunlight does not shine directly into the lens. Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera. Images cannot be rotated.
Problem Possible Cause and Recommended Action Other The wrong date and time are displayed, or the wrong date and time are being stored along with image data. The date and time setting is off. Set the correct date and time (page 89). The messages on The wrong display language is selected. Change the display the display are in language setting (page 90). the wrong language. Images cannot be transferred over a USB connection. 1)The USB cable may not be connected securely. Check all connections.
Display Messages Battery is low. Battery power is low. There is something wrong with the memory card. Turn off the camera, remove the memory card and then reload it into the camera. If this message re-appears when you turn the camera back on, format the memory card (page 91). Card ERROR IMPORTANT! • Formatting a memory card deletes all its files. Before formatting, try transferring recoverable files to a computer or some other storage device. Communication stopped.
Number of Snapshots/Movie Recording Time Snapshot Settings Image Size (Pixels) Built-in Memory*1 Recording Capacity Approximate File Size microSD Memory Card*2 Recording Capacity 1:1 8M (2976x2976)*3 2.97 MB 9 3048 4:3 12M (4000x3000) 4.
Specifications File Format Snapshots: JPEG (Exif Version 2.3; DCF 2.0 standard; DPOF compliant) Movies: MOV format, H.264/AVC standard, IMA-ADPCM (monaural) Recording Media Built-in Memory (Image Storage Area: 49.9MB*) microSD/microSDHC/microSDXC * Built-in memory capacity after formatting Recorded Image Sizes Snapshots: 4:3 (12M 4000x3000), 1:1 (8M 2976x2976) Movies: 1024 (1024x1024 30 fps), 480 (480x480 30 fps) Effective Pixels 10.5 Megapixels Imaging Element Size: 1/2.
Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life.
. USB-AC adaptor (AD-C54UC) Input Power 100 to 240 V AC, 50/60 Hz, 90 mA Output Power 5.0 V DC, 650 mA Operating Temperature Requirements 5 to 35°C (41 to 95°F) Dimensions 64.6 (W) x 38.4 (H) x 24 (D) mm (2.5" (W) x 1.5" (H) x 0.9" (D)) (excluding projections) Weight Approximately 40 g (1.
CASIO COMPUTER CO., LTD.
