Basic Manual For inquiries, call: Phone Call Inputting Characters Address Book/ Pair Function Mail/ Hello Messenger au Customer Service Center (General Information) From EZweb site: How to access Contents/Ready Camera 5 5 7 5 6 or EZ→Top Menu→料金・申込・インフォ(Charges, EZweb Applications, Info)→お問い合わせ(Inquiries) ※ Menu structure is subject to change without notice.
Introduction Thank you for purchasing the W41CA. Before using it for the first time, be sure to read the W41CA Basic Manual (this PDF manual) so as to know how to use it correctly. After you finish reading this manual, store it and the printed materials that come with the phone in a safe place for future reference. Printed Manuals for the W41CA (Japanese) The W41CA comes with a Basic Manual and an Instruction Manual.
Cellphone Etiquette Mind your manners! A cellphone always emits weak radio waves while it is turned on. Enjoy operation of your cellphone without forgetting to be considerate of those around you. Some locations do not allow the use of cellphones. ■ Using a cellphone while driving is both dangerous and prohibited by Japanese law. ■ Using a cellphone inside of an aircraft is prohibited by law. Be sure to turn off your cellphone before takeoff.
Cellphone Basics Features Camera Shoot photos and record movies, and send them by e-mail. Page 62 PC site viewer View WEB sites created for viewing on PCs. Page 92 EZ Navi EZ Navi Walk, Position Search, and Area Message allow you to get various kinds of location information. They are all built-in functions. Page EZ FeliCa Hello Messenger Use the cellphone for shopping by using e-money, or use it as member’s cards, point cards, and so on.
Manner Mode and Easy Voice Memo Easy Voice Memo Manner Mode Use Manner Mode to turn off the ring tone so as not to bother others around you. While the standby screen is displayed, hold down ( for about one second. Shhhhhhh! Page If you cannot answer a call, Easy Voice Memo plays an answering message and records the caller’s message. While the standby screen is displayed, hold down C for about one second.
Never use your cellphone while driving! Holding a cellphone in your hand, talking on a cellphone, or looking at a cellphone display to send mail or to perform any other operation while driving is prohibited by Japanese law. (Revised Traffic Control Law, effective November 1, 2004) × Reading mail or looking at the display. × Holding a cellphone in your hand to talk. Turn off your cellphone or use Drive Mode while driving.
Beware of spam and one-ring calls! How to Combat Spam You can set up mail filters to block specific mail or mail identified as “未承諾広告※” (unsolicited advertisement), which often includes spam. Your cellphone has the following filters to block spam.
Disaster Message Board Service Disaster Message Board The Disaster Message Board lets you use EZweb to register information about your well-being in case of a major disaster. The information you register can be accessed from anywhere in Japan over EZweb or the Internet.
災害用伝言板 災害用伝言板 伝言板トップ ∼登録∼ 被災状況 □ 無事です。 □ 被害があります。 □ 自宅に居ます。 □ 避難所に居ます。 □ コメント見て ∼サービス提供中∼ 安否情報の登録・確認が できます。 Registration 登録(ご利用可能地域の方 のみ登録可能です) 確認 削除 お知らせメール設定 サービス概要 ご利用地域情報 お問合せ 災害用伝言板 English (C)KDDI/TU-KA Group Access ∼確認∼ 安否情報を確認したい相 手のau/ツーカー携帯電話 番号を入力して下さい。 090×××××××× コメント入力(全角100文 字まで) ※登録内容確認画面にて 、お客様の携帯電話番号 および登録日時が表示さ れます。 検索する Disaster Message Board top screen 伝言板トップへ (C)KDDI/TU-KA Group 登録 伝言板トップへ (C)KDDI/TU-KA Group Information screen Information registration screen ※Reg
Contents Cellphone Etiquette ............................................................................. 1 Mind your manners! .............................................................................................................................. 1 Cellphone Basics ................................................................................. 2 Features ...............................................................................................................................................
Hello Messenger ................................................................................ 58 Contents Displays the Hello Messenger Menu .................................................................................................. 59 Invite the Members to the Meeting ..................................................................................................... 60 When You Get an Invitation Message to Join ...................................................................................
Ready All Before using the W41CA, check the contents of the package comes with your W41CA. You should also familiarize yourself with basic operations, like how to charge the battery, how to turn the power on, etc.
Names of Parts Ready ■ Front ■ Back Earpiece Optical sensor Display Incoming indicator (LED) Camera start indicator Cursor key Photo light/ Standby light Microphone ※1 Camera lens Center key Address book key EZ/AF lock key Memo/Clear key Application key Mail key Answer/ Pair key Stereo speaker FeliCa mark Power/End key Number keys Battery pack / Cover Built-in antenna ※2 Strap eyelet ※1: During a call, do not cover the microphone with your hands or your chin.
Charging the Battery Pack The battery pack that comes with the phone is not fully charged when you purchase it. Be sure to charge the battery pack before using the W41CA for the first time. Charging takes about 120 minutes. You should recharge the battery pack whenever the battery level icon shows or . Check the shape of the connectors to ensure they are aligned correctly when you connect them. •Charging : LED indicator is lit red. •Charging complete : LED indicator goes out.
Check the shape of the connectors to ensure they are aligned correctly before you connect. Trying to force a connection may damage the connectors. Ready Connect the common AC adaptor 01 (option) to the desktop holder. Fold out the power plug of the common AC adaptor 01 (option), and then plug it into a 100V AC power outlet. Attach the corner of the W41CA (as shown on the left page) into ( -1), then place the other corner of the W41CA into ( -2) of the desktop holder.
Turning On Power Hold down F for at least 1.5 seconds. The standby screen appears. icon Signal Strength Strong Medium Weak Very Weak Out of Range • Communication is not possible while the signal strength icon is (Out of Range). • Communication may not be possible while the signal strength icon is (Very Weak).
The W41CA lets you use the numbers and passwords described below. Be sure to take steps so you do not to forget your numbers and passwords. You will need them to perform various operations and to access subscription services.
Selecting English as the Display Language While the standby screen is displayed, press c. Use a to select “ 機能設定” (SETTINGS), and then press c (OK). Press 3 ( 画面表示/照明 ) (ScreenSetup/DisplayLighting).
4 (Set Language). Ready 2 (English). This selects English as the display language. Even if English is selected as the display language, schedule and other dates are displayed in the format year/month/day. Folder names inside of the Data Folder are also displayed in year/month/day format.
Operation Basics ■ Key functions u • Displays the calendar. l Displays incoming records. • Returns to the previous menu screen. • Selects an item. • • r • Displays outgoing records. Scrolls forward one menu screen. • Selects an item. • d • Displays the standby • Selects an item. shortcut icon. Selects an item. c • Displays the main menu. • % Displays the EZ apps menu. Applies an item. • • & Displays the address book. • L E-mail • • C-mail (hold down for about one second).
Display Indicators ! 1234 567 8 9 1 Signal strength 2 Battery level 3 The miniSD memory card (commercial item) is inserted into the cellphone. 4 5 During a call / 6 7 " #$% & EZ apps (BREW®)/Hello Messenger on Unread mail / au Music Player/SD-Audio Player on 8 EZ・FM on 9 Current time The date and time are set automatically.
Main Menu Pressing c while the standby screen is displayed displays the main menu. Use a to select the icon, and then press c (OK) to access the function associated with the icon. Camera au Music Player miniSD Menu Hello Messenger Data Folder EZ Service Menu Function/Setup EZ FeliCa Menu Watch/Calendar Accessories PC site viewer Menu EZ・FM ■ Using the Main Menu Example: To display the setting screen from the main menu. Press a to select “SETTINGS,” and then press c (OK).
■ Using Soft Keys Left Center Right Left soft key % Ready Soft keys are the keys you use to execute the functions along with the bottom of the screen. The table below explains how to assign the soft keys to the on-screen functions. Note that the function of each soft key depends on the currently displayed screen. Executes the function on the left. Center soft key c Executes the function in the center. Right soft key & Executes the function on the right.
Viewfinder Position and Self-portrait Position You can execute the operations with your W41CA open, set in Viewfinder position or Self-portrait position. ◎Rotate your W41CA display in the direction as illustrated below (within 180 degrees from the normal position). Gently rotate your W41CA display. Otherwise, you may damage your W41CA. ◎During rotating (motion - ), do not use your W41CA or force to give open-close motion. It may also cause damage. Open your cellphone display.
In Viewfinder position, you can view received mails or EZweb, and play the songs listed with au Music Player function (by pressing side keys). Instead of the a / c, five kinds of side keys ((, b, MP, zx, )) can be used in Viewfinder position. ( returns to the previous screen. Ready Basic Operations in Viewfinder Position ■Key operations in Viewfinder position Key ( Description • • • • • • Displays the Manner menu. Toggles Manner Mode on and off (hold down for about one second).
Initializing E-mail and EZweb An EZweb subscription is required to use e-mail and EZweb. If you did not subscribe when you purchased your phone, contact your nearest au shop or the au Customer Service Center. ※You will be assigned an e-mail address automatically when you perform the EZweb initialization procedure. While the standby screen is displayed, press L. Press c (OK). Wait until the phone connects to the server for initialization.
My phone number and mail address Ready Looking Up Your Current Phone Number and E-mail Address While the standby screen is displayed, press c. Use a to select “SETTINGS,” and then press c (OK). Press 0 (Profile). Your current phone number and e-mail address appear. XXXX △△△@ezweb. ne. j p XXXXXXXX XXXX You can also look up your phone number and e-mail address by pressing c, and then 0 while the standby screen is displayed.
Changing Your E-mail Address E-mail address △△△@ezweb.ne.jp Part you can change Domain name While the standby screen is displayed, press L. Press 8 (E-Mail Setup). Press 7 (Other Setup). When the EZweb connection confirmation screen appears, press 1 (Yes). その他の設定 1 2 3 4 Eメールアト゛レスの変更 自動転送先 メールフィルター Eメールヘッタ゛情報表示(通信 料有料) 5 その他の設定の確認 *ー*ー*ー*ー*ー*ー*ー* auのメルマカ゛サーヒ゛ス設定 (メルマカ゛の登録・変更・解 除) ※auの公式メルマカ゛です。ぜ ひご登録ください。 ◇各メニューは、パケット通信料 Press 1 (E メールアドレ スの変更 ) (Change E-mail Address).
Use j to select the text box, and then press c (Edit). Enter the e-mail address you want, and then press c (OK). 20文字まで入力可能です 。 」「- 」のみ使用可 記号は「. 能です。「. 」は連続して利 用したり、最初と最後に は利用できません。最初 に数字の「0」を使用するこ とはできません。 @ezweb.ne.jp 送信 Ready Enter your PIN, press c (OK), use j to select “送信” (Send), and then press c (Select). Use j to select “承諾する” (Accept), and then press c (Select).
Phone Call Making a Call While the standby screen is displayed, use the number keys (0 to 9) of the keypad to enter the phone number you want to call. When calling a standard phone, you also need to enter the area code. Press N. After you finish a call, press F to hang up. ※ The caller always hears your voice even when you cover the microphone with your hands. Send Methods Call : Your phone number is provided to the party you are calling in accordance with the caller ID setting of your phone.
Redialing (Outgoing Records/ Incoming Records) Phone Call While the standby screen is displayed, press s. r: Displays outgoing records. l: Displays incoming records. Use j to select the record whose number you want to dial, and then press N. The phone stores up to 50 records each for the outgoing records and incoming records. When a record is created while there are already 50 records in memory, the oldest current record is deleted automatically to make room for the new one.
Changing the Ring Tone While the standby screen is displayed, press c. Use a to select “SETTINGS,” and then press c (OK). Press 2 (Sound/Vib/ LED). Press 1 (Incoming Call).
Press 2 (Melody). Phone Call Press 1 (Fixed Sound). To hear the currently selected ring tone, press % (Check). Use j to select the ring tone you want, and then press c (OK). The ring tone is set. ◎ The initial setting is “Incoming Tone1.” ◎ You can also download a “Chaku-Uta®” from the Internet and use it for your ring tone.
Adjusting the Ring Tone Volume Beep, beep . . . To adjust the ring tone volume, perform steps 1 through 3 under “Changing the Ring Tone” (page 30), and then continue with the following steps. Press 1 (Incoming Call). Press 1 (Volume). To hear the ring tone at the current volume setting, press % (Play). Use j to adjust the ring tone volume, and then press c (OK). u: Increases volume. d: Decreases volume. Step-up : Ring tone volume gradually increases. Step-down: Ring tone volume gradually decreases.
Adjusting the Earpiece Volume during a Call Hello? Phone Call During a call, use j to adjust the volume. u: Increases volume. d: Decreases volume. You can adjust the earpiece volume (level 1-6). When you set the maximum volume (level 6), is displayed on the screen. Turning On Manner Mode While Manner Mode is set to on, the phone alerts you to incoming calls by vibrating. While the standby screen is displayed, hold down ( for about one second.
Turning On Easy Voice Memo While the standby screen is displayed, hold down C for about one second. This turns on Easy Voice Memo, the icon appears on the display while Easy Voice Memo is turned on. You can use Easy Voice Memos (up to 4 memos), and each memo can contain up to 20 seconds recording time. If a new Easy Voice Memo is recorded when there are already four memos in memory, the oldest, unprotected memo that has already been played back is deleted automatically to make room for the new one.
Playing an Easy Voice Memo Phone Call When there is a recorded Easy Voice Memos The message “ Call” and “ EasyVoiceMemo” appear on the standby screen. Select “ Call,” and then press c (OK). The incoming records list appears. Use j to select the record with the icon, and then press c (Disp). The incoming record detail screen appears. Use j to select “EasyVoiceMemo,” and then press c (Play). The easy voice memo plays back. To delete an Easy Voice Memo, press C42 while the standby screen is displayed.
Inputting Characters Input characters using keypad keys 0 through 9. The table below shows the characters each key cycles through when you press it. d e f Number of Presses 1 2 3 4 5 6 7 8 1 . @ - _ / : ~ 1 2 a b c A B C 2 3 d e f D E F 3 4 g h i G H I 4 5 j k l J K L 5 6 m n o M N O 6 7 p q r s P Q R 8 t u v T U V 8 9 w x y z W X Y Key 0 0 .
Inputting an E-mail Address mark@ ■ Inputting “mark@ezweb.ne.jp” Input “mark.” To input “m”: Press 6 once. To input “a”: Press 2 once. To input “r”: Press 7 three times. To input “k”: Press 5 twice. Inputting Characters In this example, we will input “mark@ezweb.ne.jp” for “<E-Mail Add1>.” To input “<E-Mail Add1>,” perform steps 1 through 6 under “Registering an Address Book” (page 40), and then perform the following steps. Press & (Menu). Press 2 (Useful Sentence). Use j to select “@ezweb.ne.
Inputting Pictographs and Useful Sentences The following procedure shows how to input pictographs and useful sentences on the text input screen. Press % (Char), and then 6 (Pictograph). You can also select a pictograph by pressing #. Use a to select the pictograph you want, and then press c (Select). Use L and R to scroll through the various categories of pictographs. To input consecutive pictographs, press & (Serial). Press & (Menu), and then 3 (Useful Sentence).
Use j to select the useful sentence you want, and then press c (OK). Here we will select “Happy birthday!.” You can also input “Happy birthday!” by pressing 17. Inputting Characters The following shows the input screens for symbols (double-byte) and emoticons. Symbol (Double-byte) Input In step 1 of the above procedure, press % (Char), and then 5 (&@) to display the “FullSym” (doublebyte symbol menu).
Address Book Registering an Address Book While the standby screen is displayed, hold down & for about one second. Select “ <Name>,” and then press c (Edit). Enter the name, and then press c (OK). The <Reading> is generated automatically when you enter a name. To input text → “Inputting Characters” (page 36) Use j to select “ <Phone Number1> ,” and then press c (Edit).
Enter the phone number, and then press c (OK). When entering the number of a standard phone, be sure to include the area code. If you do not want to enter an e-mail address, jump to step 8. Enter the e-mail address, and then press c (OK). Address Book Use j to select “ <E-Mail Add1>,” and then press c (Edit). To input an e-mail address → “Inputting an E-mail Address” (page 37) Press & (Reg). ◎ The Address Book can contain up to 700 records. ◎ Address Book Records are numbered from 000 through 699.
Editing an Address Book Record Address... Birthday... Group... Example: To edit the phone number of “Tom Carter” While the standby screen is displayed, press &. Use a to select the record you want to edit, and then press & (Menu). Press 3 (Modify). Press 1 (Overwrite).
Use j to select “ 0900006XXXX,” and then press c (Edit). To delete characters, press C. Press & (Reg). Address Book Make the changes you want, and then press c (OK).
Adding Outgoing or Incoming Record Data to the Address Book While the standby screen is displayed, press s, use j to select the phone number you want to save, and then press & (Menu). r: Displays outgoing records. l: Displays incoming records. Press 4 (Reg Add Book). Press 1 (Reg New). To enter the name, use the procedure starting from step 2 under “Registering an Address Book” (page 40).
Dialing from the Address Book Press c (Disp). Address Book While the standby screen is displayed, press &, and then use a to select the record whose phone number you want to dial. Hello? The details screen of the record appears. Use j to select the phone number, and then press N.
Pair Function You can save up to five phone numbers (like frequently used ones from the address book). You can make calls, send mails to or use Hello Messenger with these saved numbers (called Pair Partners) more easily. Registering a Pair Partner While the standby screen is displayed, press N. If the Pair partner is not registered, the confirmation screen appears. Press c (OK). Use s to select the 1 through 5 tab where you want to register the Pair partner.
Making a Phone Call, Sending Mail, Invite a Pair Partner to a Hello Messenger Meeting While the standby screen is displayed, press N. Pair Function Use s to select the Pair partner. Use j to select “Call,” and then press c (OK). Selecting “Send E-Mail”/“Send C-Mail,” and then pressing c (OK) will display a screen for composing and sending an e-mail/a C-mail message.
Mail EZweb subscription required Your W41CA supports two types of mail: e-mail and C-mail. Using E-mail To use e-mail, you need to subscribe to an EZweb service. If you did not subscribe when you purchased your phone, contact your nearest au shop or the au Customer Service Center. In addition to an EZweb subscription, you also need to perform an initialization procedure before you can use e-mail. If you have not performed initialization yet, refer to “Initializing E-mail and EZweb” (page 24).
Using C-mail C-mail lets you exchange text messages that contain up to 50 double-byte characters (100 single-byte characters) with another au Page 56 cellphone that supports C-mails. C-mail Center Mail Sent using a phone number. Example: 090-0001-XXXX Received using a phone number. Example: 090-0002-XXXX C-mail can be sent to another au cellphone.
Creating and Sending E-mail Messages While the standby screen is displayed, press L, and then press 1 (Create New). Select , and then press c (Edit). : Address to which the e-mail will be sent. You can send an e-mail up to five addressees at a time. Press 1 (Address Book), use a to select an addressee, and then press c (Select). You can select an addressee from sending records, receiving records, or My Address, or you can enter an address.
Use j to select , and then press c (Edit). : Subject of the e-mail message. Enter the subject, and then press c (OK). Use j to select , and then press c (Edit). Mail : Body of the e-mail message. Enter the body text, and then press c (OK). Press % (Send) or N. “Photo Mail,” “My Pictograph,” “Easy Pictograph” are the auto address converter (a part of the e-mail address will be converted automatically).
Reading Received E-mail Messages When you receive an e-mail The message “ E-Mail” and appear on the standby screen. Select “ E-Mail,” and then press c (OK). Press c (OK). : Indicates an unread message. : Indicates an already read message. Use j to select the unread e-mail you want to view, and then press c (Disp). The received e-mail message appears. If all of the message cannot be displayed, press d to scroll. Use L and R to scroll between messages. Press C to return to the e-mail message list.
Reading an E-mail Message with an Attached Photo or Movie Example: To see a photo attached to an e-mail. Mail Use j to select the e-mail message, and then press c (Disp). Use j to select a file name, and then press c (Rcv). ◎ Photos or movies may be displayed within mails or may require the recipients of the mails to select file names and press c (Play) to display those files, depending on the file sizes of the attached photos or movies.
Replying to a Received E-mail Message To reply to an e-mail message, perform steps 1 through 3 under “Reading Received E-mail Messages” (page 52), and then perform the following steps. Press % (Reply). You can also display the e-mail composition screen by pressing & (Menu), and then 1 (Reply). Press c (Edit), and then enter the body text. is prefixed with “Re:,” and the body text of the e-mail is quoted.
Avoiding Spam It is recommended that you use our mail filter function to block spam. KDDI Corporation provides a new service, “ サ ポート設定 ” (Supportive settings) which allows you to choose filtering options by answering our questions shown on the screen. ■ Configuring Mail Filter Settings Example: To access the “サポート設定” (Supportive settings) 1 While the standby screen is displayed, press L. 6(Mail Filter) 1(Yes).
Creating and Sending C-mail Messages While the standby screen is displayed, hold down L for about one second, and then press 1 (Create New). Select , and then press c (Edit). Press 1 (Address Book), use a to select an addressee, and then press c (Select). You can also select a phone number from sending records or receiving records, or you can enter an address. Use j to select the phone number you want to enter, and then press c (OK). 56 Hold down ...
Use j to select , and then press c (Edit). Enter the body text, and then press c (OK). Press % (Send) or N. Mail When the C-mail reaches the other party, the message “Completed.” appears, and the message is stored in your sending records. Reading Received C-mail Messages When you receive a C-mail. The message “ C-Mail” and appear on the standby screen. Received C-mail icon Select “ C-Mail,” and then press c (OK). : Indicates an unread message.
Hello Messenger EZweb subscription required “Hello Messenger” is like a portable chat room which allows you to send text, sound and photo in real time to all the chatters (using au cellphone supporting this service). All chatters are represented by cartoon-style characters they selected. The host can invite up to 4 people from the address book entries. Hello Member 1 Host Hello Send text messages. Member 2 Voice call Member 4 Member 3 Shoot and send the photos. Send text messages.
Displays the Hello Messenger Menu While the standby screen is displayed, press c . When you start Hello Messenger for the first time, press c (OK) and select your own cartoon-style character, then press c( 設定 )(Setting).
Invite the Members to the Meeting You can invite the members to start the meeting. To start the meeting, perform steps 1 through 2 under “Displays the Hello Messenger Menu” (page 59), and then continue with the following steps. Use j to select “ スター ト ” (Start), and then press c ( 選択 )(Select). Use j to select “ アドレス帳 ” (Address Book), and then press c ( 選択 )(Select). Use a to select the members.
You can register the member from “ハローランキング” (Hello Ranking) or “グループ” (Group). When You Get an Invitation Message to Join When you get an invitation message to join The message (inviting you to join the meeting) appears on the display. Hello Messenger When you get an invitation message to join, ring tones sounds or your cellphone vibrates. The invitation screen (inviting you to join the meeting) appears.
Camera Features Your W41CA comes with a built-in 2.1-megapixel, 2.07-million effective pixel camera to shoot photos and record movies. You can attach the photos and movies that you shot/recorded to e-mail messages. Using the Camera Shooting a Photo (page 64) Recording a Movie (page 66) 1 Use your images for W41CA functions! You can use photos you shot for the standby screen, for the image that appears while the ring tone is sounding, and in your address book.
Tips for Better Photos Shooting with the cellphone open Shooting in the Viewfinder position Do not cover the lens or optical sensor with your hands. Hold the camera securely with both hands. Use the index finger of your right hand to press ) to release the shutter. Do not cover the lens or optical sensor with your hands. Hold the camera securely with both hands. Use your thumb to press c (Shutter) to release the shutter.
Camera Shooting a Photo While the standby screen is displayed, press c. Use a to select “CAMERA,” and then press c (OK). Press 1 (Photo). Point the lens at the subject, and then press c (Shutter). b ) The phone emits a shutter sound. Note that the phone emits the shutter sound even if it is in Manner Mode. You can also press / in place of c. Check the subject through the monitor screen (within the area indicated as ), and release the shutter.
Press c (Save). The display shows the message “Saved to data folder (Phone).,” and then returns to the photo monitor screen. Photos you shot are saved to the “Photo Folder,” which is in the Data Folder. The initial photo mode setting when you purchase your W41CA is “Phone Mode (Wallpaper 240×320)”. Meanings of the Photo Titles in the “Photo Folder,” which is in the Data Folder. Example of a Photo Title Time: 11:23 a.m.
Recording a Movie While the standby screen is displayed, press c. Use a to select “CAMERA,” and then press c (OK). Press 2 (Movie). Point the lens at the subject, and then press c (Rec). b ) The phone emits a shutter sound to signal the start of recording. Note that the phone emits the shutter sound to signal the start of recording even if it is in Manner Mode. You can also press / in place of c. To stop recording, press c (End).
Press c (Save). The display shows the message “Saved to data folder (Phone).,” and then returns to the movie monitor screen. Movies you recorded are saved to the “Movie Folder,” which is in the Data Folder. The initial movie mode setting when you purchase your W41CA is “Mail Mode (High Quality L 176×144)”. The maximum recording time in “Mail Mode” is 15 seconds. Example of a Movie Title Date: April 12, 2006 060412_1123∼0001 Time: 11:23 a.m.
Shooting Photos and Recording Movies in Viewfinder Position Perform steps under “Viewfinder Position and Self-portrait Position” (page 22), and then continue with the following steps. Example: Recording movies in Viewfinder position b Press x z P M Use . and to b select “CAMERA,” and then press (OK). Use zx to select “Movie,” and then press b(OK). To shoot the photo, use zx to select “Photo,” and then press b(OK).
Point the lens at the subject, and then press ) (Rec). The phone emits a shutter sound to signal the start of recording. To shoot the photo, jump to step 6. Display End Camera End Camera Wide/Zoom Dark/Light Side key operation ( ((hold down for about one second) MP zx Display Side key operation Menu b Quick Play b(hold down for about one second) Shot/Rec ) To stop the recording press ) (End). Camera Even if you do not press ), recording will stop automatically after about 15 seconds.
Viewing Photos and Movies While the standby screen is displayed, press c and, use a to select “DATA FOLDER,” and then press c (OK). Use j to select “Photo Folder,” or “Movie Folder,” and then press c (Detail). Selecting “All Data” displays a list of all photos and movies in the “Photo folder” or “Movie Folder.” Use j to select the dated (by recording date) folder, and then press c (Detail). A list of all movies that were recorded on that day are displayed.
Attaching a Photo or Movie to an E-mail Message Perform the procedure from step 1 to 4 under “Shooting a Photo” (page 64) or “Recording a Movie” (page 66), and then perform the following steps. Press % (E-Mail), and then press 1 (Attach). Photos you shot are stored in the “Photo Folder” and movies are stored in the “Movie Folder,” (those folders are in the Data Folder). ※ A movie attached to an e-mail can be played only on the cellphone that supports movie playback or on a PC.
EZweb EZweb subscription required Using EZweb To use EZweb, you need to subscribe to an EZweb beforehand. If you did not subscribe when you purchased your phone, contact your nearest au shop or the au Customer Service Center. In addition to an EZweb subscription, you also need to perform an initialization procedure before you can use EZweb. If you have not performed initialization yet, refer to “Initializing E-mail and EZweb” (page 24).
Displaying the EZ Top Menu While the standby screen is displayed, press R, and then press 1 (Top Menu).
Bookmarking Sites You Frequently Access Bookmark it! Display the site you want to bookmark, and press & (BrowserMenu). Press 1 (New bookmark). ※ You may not be able to bookmark some sites. Press & (Reg). Use j to select a folder, and then press c (OK). The message “Registered” appears when completed. You can have up to 100 sites bookmarked in the Favorite Site list.
’s go et e! he r L Viewing a Bookmarked Site While the standby screen is displayed, press R. Press 2 (Favorite Site). EZweb Use j to select a site or folder, and then press c (OK). If you selected a folder, use j to select a site, and then press c (OK).
Downloading Chaku-Uta® To download a Chaku-Uta®, perform step 1 under “Displaying the EZ Top Menu” (page 73), and then perform the following steps. Use j to select “ カテゴリで 探す ” (Search by Category), and then press c (OK). Use j to select “ 着うた・ 着ムービー ” (Chaku-Uta®/ Chaku-Movie), and then press c (Select).
Downloading Chaku-Uta-Full® While the standby screen is displayed, press c, use a to select “EZ SERVICE,” and then press c (OK). EZweb Use j to select “au Music,” and then press c (OK). Use j to select “Jump to EZ Music!,” and then press c (OK). This operation connects the phone to “EZ Music!.” For the operations after connecting, follow the instructions displayed on the screen.
Checking Charges You can check call and transmission charges. While the standby screen is displayed, press c11. When the EZweb connection confirmation screen appears, press 1 (Yes). Use j to select the item you want to check, and then press c (Select).
EZ Channel EZweb subscription required EZ Channel allows you to automatically download the programs (the ones you selected and preregistered) to your W41CA. Every updated program will be delivered to your W41CA since late at night to early morning (2:00 a.m. - 8:00 a.m.). ■ Displaying EZ Channel Menu Press 2 (EZchannel). PressR, and then press 4(EZ Service Menu). Standby screen EZ Service Menu EZChannel Menu ■ Enjoying EZ Channel ① Register the programs you are interested in.
EZ Navi Features EZweb subscription required EZ Navi uses global positioning system (GPS) information to provide you with useful information. You can use “EZ Navi Walk” that navigates you to your destination, “Position Search” that allows you to check where your child is, and “Area Message” that lets you know when your child is coming close to the destination. PressR,and then press4(EZ Service Menu). Standby screen Press 4(EZnavi).
“EZnaviwalk” A menu of useful options you can use while you are out. The latest news and featured information ※ “おためしナビ”(Navi Demo) provides the demonstration of voice navigation or “Voice input” function.
Security Navi Features EZweb subscription required Position Search Features When your child does not come home early and you are worried if your child may be lost, you can check the current location of your child by a map with a simple operation. There are two kinds of services of “Position Search”: “Position Search Mail” and “Auto Position Search.” 1 “位置確認メール” (Position Search Mail) Features ou Did y ol ? scho finish Co ho min me g ・The mother can send a mail with a message to her child.
Area Message Features For the mother who wants to know her child’s location, W41CA provides following service. When the child enters or goes out of the specified area during the specified time flame, the his/her mother will be notified by an alarm sound, and will also get a message from child’s cellphone automatically. “安心ナビエリア通知” (Area Message) Features He’s arrived at cram school.
EZ FeliCa EZweb subscription required EZ FeliCa is a service available for the cellphones loading the technology of contact-free IC cards called FeliCa. Simply by holding W41CA over reader/writer (external device)※, you can use W41CA for shopping by using e-money or use it as member’s cards, point cards, and so on. When you use EZ FeliCa, you need to download the applications from the provider of the service you want to use. “電子マネー「Edy」” (“Edy,” the e-money) is prepared at the time of purchasing.
Communicating with Reader/Writer You can use EZ FeliCa simply by holding the FeliCa mark over reader/writer. Hold the FeliCa mark of W41CA over reader/writer. FeliCa mark the battery level is very low, you may not be able to use EZ FeliCa. EZ FeliCa ◎ You can use EZ FeliCa without starting FeliCa-supported EZ apps. ◎ EZ FeliCa is available even when the power is turned off. However, when ◎ Be careful not to bump the FeliCa mark against reader/writer when holding it.
Setting FeliCa Lock You can restrict the use of EZ FeliCa by setting FeliCa Lock on. Incidentally, you can temporarily release the FeliCa Lock and use EZ FeliCa for a certain period of time by holding down r for about one second while the standby screen is displayed and entering the lock number (quick release). While the standby screen is displayed, press c4151. Press 1 (ON), and then enter the lock number. The FeliCa Lock is set.
Using FeliCa-supported EZ apps “電子マネー「Edy」” (“Edy,” the e-money) is prepared as FeliCa-supported EZ apps in W41CA at the time of purchasing. ■ Starting FeliCa-supported EZ apps While the standby screen is displayed, press c. Use a to select “EZ FeliCa,” and then press c (OK). EZ FeliCa menu appears. EZ FeliCa menu The list of the FeliCa-supported EZ apps saved in W41CA is displayed. Select the EZ apps you want to start. EZ FeliCa Press 1 ( アプリ一覧 ) (EZ apps List).
EZ•FM EZweb subscription required The W41CA allows you to listen to the FM radio. Before using EZ•FM ■ Connecting Casio flat-type stereo earphones 03 Open the cover of the flat-type earphone-microphone jack of your W41CA, and connect Casio flat-type stereo earphones 03 to your W41CA. Stereo earphones ■ To listen to the EZ•FM clearly In places like a indoor room where reception condition is not good, you may not be able to listen to the EZ•FM. In such case, try the measures below.
Listening to the EZ•FM While the standby screen is displayed, press c. Use a to select “EZ·FM,” and then press c (OK). The precautions will be displayed. Read the precautions, and then select “ 承諾する ” (Accept). If you select “ 承 諾(次回から非表示)(Not display hereafter),” they will not be displayed after the next time. Frequency area Radio station/ Song title area EZ • FM screen EZ•FM Press C. You can switch between Frequency area and Radio station/Song title area.
■ Adjusting the volume Press j on the EZ•FM screen to adjust the volume. d Decreases volume. Increases volume. u ※ There are 20 levels for the volume. ■ Tuning the radio frequency Press C on the EZ•FM screen, and then select the frequency area. s s (hold down for about one second) Tuning (by 0.1MHz) Automatic tuning When you select the song title area, using s key allows you to select the radio station.
Suspending/Stopping the EZ•FM Suspends/stops the EZ·FM apps. Even after suspending the EZ·FM apps, you can listen to the EZ·FM as a BGM. Press F on the EZ•FM screen. Press 1 (Suspend) or 2 (Stop). Suspend Suspends the EZ•FM apps. Stop However, you can continue listening to the EZ•FM. Stops the EZ•FM.
PC site viewer Features EZweb subscription required 1 You can view WEB sites for PC with W41CA A WEB site for PC The content displayed is an example, and it may differ from the contents that actually appear on the display of your phone. 2 Viewing a site with PC site viewer If you set the “表示モード ” (Display Mode) to “スモールスクリーン” (Small Screen), a WEB site is displayed adjusted to the size of W41CA screen, and you can view the site with simple j operations.
PC site viewer To use the PC site viewer, an EZ WIN course subscription is required. If you did not subscribe when you purchased your cellphone, contact your nearest au shop or the au Customer Service Center. Using the PC site viewer, you can comfortably view the WEB sites just like those you usually view with your PC, by high speed packet communication of 2.4 Mbps down at maximum. Mastering Operation Basics While the standby screen is displayed, press c.
Using Standby Assignment It’s It s updated. You can set a portion of a WEB site as the standby screen. You can set it to be automatically-updated at specified intervals. When a specified time elapses on the standby screen, the WEB site selected by “ 待受指定 ” (Standby Assignment) is displayed. To use “ 待受指定 ” (Standby Assignment), perform steps 1 through 4 under “Mastering Operation Basics” (page 93), and then perform the following steps. Display your favorite page, and then press & (メニュー) (Menu).
Press c (編集) (Edit), enter the title, and then press c (OK). Press & (登録) (Register), and then press & (設定) (Setting). Use j to select the interval to update the standby screen. If you select the interval to automatically-update the page displayed as the standby screen from among “ 24時間/12時間/8時間/4時間/2時間/1時間/30分/ 更新しない ” (24 hours/12 hours/8 hours/4 hours/2 hours/1 hour/30 minutes/no update), and press c (OK), then “ 待受指定警告表示 ” (Standby Assignment Warning Display) appears.
Smart Mode Be e p !! Smart Mode lets you limit operations to the telephone function, address book, camera, e-mail, C-mail, EZweb, and other frequently used functions, which simplifies operations. Entering Smart Mode While the standby screen is displayed, press c, use a to select “SETTINGS,” and then press c (OK). Press 5 (User Support), 2 (OperationSupport), and then 3 (Mode Setup). Press 2 (Smart Mode). ◎ The lock number is required when changing from Teens Mode to Smart Mode.
Exiting Smart Mode While the standby screen is displayed, press c. Use j to select “SETTINGS,” and then press c (Select). Press 0 (SmartModeOFF). Press 1 (Yes). This returns to Usual Mode.
Using the Smart Mode Main Menu Smart Mode has its own main menu. You can switch between the two available Smart Mode main menu styles by pressing & (Switch).
Adding Data to the Address Book in Smart Mode Tom While the standby screen is displayed, press &, press 2 (Register), and then press c (Fix). Enter the name, and then press c (OK). To input text → “Inputting Characters” (page 36) Check the reading of the name you inputted, press c (OK), and then press 3 (Input by Myself). You can also select data in incoming records or outgoing records. To go without saving the telephone number, press 4(Not Input) and perform step 5.
Press 3 (Input by Myself). You can also select data in sending records or receiving records. To go without saving E-mail address, press 4(Not Input) and perform step 7. Enter the e-mail address, and then press c (OK). To input an e-mail address → “Inputting an E-mail Address” (page 37) Press 2 (Not Register). The confirmation screen appears. Press c (OK). Press c (Reg). ◎ In Smart Mode, you can only input “Name,” “Reading,” “Phone Number1,” “E-Mail Add1,” and “Image” data into an address book record.
Using the Address Book in Smart Mode Example: To view a record in address book While the standby screen is displayed, press & , and then press 1 (Look). Use a to select the address book record you want to view, and then press c (Select). Press 3 (Read Data). 1(Call): Dials the number of the selected record. 2(Send Mail): Selects to compose an e-mail message and send it to the address of the selected record.
Creating and Sending E-mail Messages in Smart Mode While the standby screen is displayed, press L. Press 1 (E-Mail). Press 1 (Create Mail). Press 1 (Address Book). You can select an addresses from sending/receiving records, or you can manually enter an address.
Use a to select an addressee, and then press c (Select). Press c (Select). When you have already registered two or more e-mail addresses in the address book (in Usual Mode/ Teens Mode), Setting to Smart Mode displays only the e-mail address you usually use. Press c (Fix). Enter the subject, and then press c (OK). To input text → “Inputting Characters” (page 36) Smart Mode Press c (Fix).
Enter the body text, and then press c (OK). To input text → “Inputting Characters” (page 36) Press 3 (Not Attach). The confirmation screen appears. Press c (OK). 1 (Data Folder): You can select a photo saved in the Data Folder and attach it to the email message. 2(miniSD): You can select a photo saved in the miniSD memory card and attach it to the e-mail message. In Smart Mode, an e-mail message can have only one attachment. After checking the content of the e-mail, press c (Send).
Shooting a Photo in Smart Mode Clic k! While the standby screen is displayed, press c, use j to select “CAMERA,” and then press c (Select). Press 1 (Photo), and then press 1 (Photo1). Photo 1 Photo 2 Photo 3 Wallpaper 240×320 WideWallpaper 240×400 VGA 640×480 Point the lens at the subject, and then press c (Shutter). ) The phone will emit a shutter sound. You can also press in place of c. Smart Mode Press & (Save).
Viewing Photos in Smart Mode While the standby screen is displayed, press c, use j to select “DATA FOLDER,” and then press c (Select). Press 1 (Data Folder). Use j to select “Photo Folder,” and then press c (Select). Selecting “All Data” displays a list of all photos in the Photo Folder. Use j to select the dated (by shooting date) folder, and then press c (Select). A list of all photos that were shot on that day are displayed.
Use a to select the photo you want to view, and then press c (Menu). Press 1 (Play). The photo appears. 2 (Delete): Deletes data. 3 (Attach E-Mail): Displays a screen for composing an e-mail message with an attachment. To create an e-mail message → Perform the procedure starting from step 4 under “Creating and Sending E-mail Messages in Smart Mode” (page 102). 4 (MoveTo miniSD): Moves the data to miniSD memory card. 5 (Send via Ir): Sends your data via infrared.
Teens Mode Teens Mode can be used to block spam, and to block inadvertent access to phone numbers and URLs included inside mail messages. Teens Mode can also be used to restrict call time and the number of mail (sended). Using Teens Mode ■ Teens Mode can be used to restrict mail reception and display contents. When the sender is a Pair partner Receipt is allowed. When the sender is included in the address book Receipt is allowed.
Turning on Teens Mode While the standby screen is displayed, press c, use a to select “SETTINGS,” and then press c (OK). Press 5 (User Support), and then 2 (OperationSupport). Press 3 (Mode Setup), and then 3 (Teens Mode). Enter the lock number. Teens Mode The lock number is required when changing from Teens Mode to Usual Mode or Smart Mode.
Other Functions Hot Key Features When you have Hot Key turned on, holding down 0 for about one second while the standby screen is displayed will dial a preset phone number or sound the Hot Buzzer. Hot Dial With Hot Dial, holding down 0 for about one second will dial a preset phone number. ■ To turn on Hot Dial While the standby screen is displayed, pressc5251, and then input the lock number. Next, input the phone number you want to preset, and then press c (Reg).
The Hot Buzzer sounds from the speaker of W41CA even when you have Casio flat-type stereo earphones 03/flat-type switched earphone microphone (option)/flat-type stereo earphone-microphone (option) attached to your W41CA. Extension Mode Using the extension mode, W41CA automatically shuts down the radio wave after issuing the Low Battery Alert. This is quite a useful function that you can still check Outgoing/Incoming Records, Content of e-mail, Address Book, Schedule and so on when necessary.
In addition to the functions covered in this Basic Manual, your W41CA also has the following features. Global Expert Infrared communication W41CA supports Global Expert based on au IC card. Global Expert is an international roaming service for the customers to use the phone replacing its au IC card with GSM cellphone for overseas use. No special application procedure or daily/monthly fee are needed, and the call charge is added up to domestic call, so the pay procedure is simple.
Troubleshooting Symptom What to check The phone does not turn on. Is the battery pack installed correctly ? Correctly install the battery pack. Is the battery pack charged ? Charge the battery pack. P.12 Are you holding down F for at least 1.5 seconds ? Hold down F for at least 1.5 seconds to turn on the phone. P.14 (Out of Range) Is on the display ? Wait until you are in a location is not displayed before where trying to make a call. P.
If you lose your W41CA Turning on Remote Auto Lock makes it possible for you to set Auto Lock and FeliCa Lock on from a remote location. These lock function keeps others from using your W41CA. Auto Lock OK! ■ Configuring Remote Auto Lock Settings You can set Auto Lock and FeliCa Lock on by making calls several times from the registered phone number to your W41CA within the specified period of time . While the standby screen is displayed, press c414.
Press 3 (Num of Incoming), input the lock number, input the number of calls you want to specify, and then press c (OK). You can set how many times you should repeat making a call to activate Remote Auto Lock. You can set it from 3 to 10 calls. Press 4 (Caller ID List), and then input the lock number. Use j to select a registration number, press % (Edit), input the phone number, and then press c (Reg). You can register up to three different phone numbers.
Index A Address Book ................................... Adding outgoing or incoming record data to the address book ............. Dialing from the address book ........ Editing ............................................. Registering an address book .......... Adjusting the earpiece volume during a call ................................... Adjusting the ring tone volume ....... 40 44 45 42 40 33 32 B Basic operations in Viewfinder position .......................................... 23 Battery level .....
M Mail C-mail .............................................. 49 E-mail .............................................. 48 Mail filter ........................................ 5, 55 Main menu ................................... 20, 98 Manner Mode Turning on ....................................... 33 Vibrator ............................................ 33 Mind your manners! ........................... 1 miniSD memory card ................... 11, 19 Movie Movie Folder ...................................
For inquiries, call: au Customer Service Center (General Information) From EZweb site: How to access 5 5 7 5 6 or EZ→Top Menu→料金・申込・インフォ(Charges, Applications, Info)→お問い合わせ(Inquiries) ※ Menu structure is subject to change without notice. From regular phones: フリーコール 0077-7-111 (toll free) From au cellphones: 157area code not required (toll free) Pressing "zero" will connect you to an operator, after calling "157" on your au cellphone.