User manual - 074H_midi

10.1 Bank Select (00H,20H)
Message Format: BnH 00H mmH (MSB)
BnH 20H llH (LSB)
n: MIDI Channel Number
mm: MSB Value(Note1)
ll: LSB Value(Send:00H, Receive:Ignored)
Note1 : For details about the relationship between the MSB value and the tone, see the Tone List that comes with the
Instrument.
Send Sent when a tone is selected.
Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the
tone is not actually changed until a Program Change message is received. For details, see “12 Program
Change”.
10.2 Modulation (01H)
Message Format: BnH 01H vvH
n: MIDI Channel Number
vv: Value
Send Sent when the modulation button is operated (CTK-7200, CTK-7300, WK-7600 only).
Receive Receipt adds, to the tone being sounded, modulation of a depth sp ecified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
10.3 Data Entry (06H,26H)
Message Format: BnH 06H mmH (MSB)
BnH 26H llH (LSB)
n: MIDI Channel Number
mm: MSB Value
ll: LSB Value
Send Sent when there is a change to the parameter assigned to RPN, NRPN.
Receive Receipt changes the parameter assigned to RPN, NRPN.
10.4 Volume (07H)
Message Format: BnH 07H vvH
n: MIDI Channel Number
vv: Value
13