User manual - 074H_midi

Note1 : For information about the relationship between setting values and send/receive values, see the “35.10 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar 4’ is operated.
Receive Receipt changes the drawbar 4’ position.
10.17 Filter Cut Off (4AH)
Message Format: BnH 4AH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “35.2 –64 - 0 - +63
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when the filter cut off setting is configured.
Receive Receipt changes how the cut-off filter is applied.
10.18 Drawbar Position 2 2/3’(4AH)(Drawbar tone selected)
Note : This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format: BnH 4AH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “35.10 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar 2 2/3’ is operated.
Receive Receipt changes the drawbar 2 2/3’ position.
10.19 Drawbar Position 2’(4BH)(Drawbar tone selected)
Note : This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format: BnH 4BH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “35.10 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar 2’ is operated.
Receive Receipt changes the drawbar 2’ position.
18