User manual - 074H_midi

10.36.2 DSP Enable
Message Format: BnH 62H 01H
BnH 63H 02H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: Value (Note1)
ll: (Send:00H, Receive:Ignored)
Note1 : For information about the relationship between setting values and send/receive values, see the “35.1 Off/On Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when each part’s DSP Line On/Off operation is p erformed.
Receive Receipt changes the DSP on/off setting of the corresponding part.
10.36.3 Mixer Scale Tune Enable
Message Format: BnH 62H 00H
BnH 63H 03H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: Value (Note1)
ll: (Send:00H, Receive:Ignored)
Note1 : For information about the relationship between setting values and send/receive values, see the “35.1 Off/On Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when each part’s Scale On/Off operation is p erformed.
Receive Receipt changes the scale on/off setting of the corresponding part.
10.36.4 Drawbar Position
Message Format: BnH 62H ffH
BnH 63H 40H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
ff: Drawbar Foot(Feet) (Note1)
mm: Value (Note2)
ll: (Send:00H, Receive:Ignored)
24