User manual - Midi Implimentation

Send Sent when the volume of any part is changed.
Receive Receipt changes the volume of the corresponding part.
10.5 Pan (0AH)
Message Format: BnH 0AH vvH
n: MIDI Channel Number
vv: Value(Note1)
Note1 : For information about the relationship between setting values and send/receive values, see “35.4 Pan Setting Value
Table” in “VIII Setting Values and Send/Receive Values”.
Send Sent when the pan of any part is changed.
Receive Receipt changes the pan of the corresponding part.
10.6 Expression (0BH)
Message Format: BnH 0BH vvH
n: MIDI Channel Number
vv: Value
Send Sent when Auto Accompaniment is used and during recorded song playback.
Receive Receipt changes the Expression value.
10.7 General Use Controllers 1 through 8 (10H through 13H, 50H through
53H)
On this Instrument, these messages are used to control DSP operation.
Message Format: BnH 10H vvH DSP Parameter7[1]
BnH 11H vvH DSP Parameter7[2]
BnH 12H vvH DSP Parameter7[3]
BnH 13H vvH DSP Parameter7[4]
BnH 50H vvH DSP Parameter7[5]
BnH 51H vvH DSP Parameter7[6]
BnH 52H vvH DSP Parameter7[7]
BnH 53H vvH DSP Parameter7[8]
n: MIDI Channel Number
vv: Value
Send Sent when the DSP parameter setting is configured.
14