User manual - Midi Implimentation

Note1 : For information about the relationship between setting values and send/receive values, see the “35.10 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar 1 1/3’ is operated.
Receive Receipt changes the drawbar 1 1/3’ position.
10.24 Vibrato Delay (4EH)
Message Format: BnH 4EH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “35.2 –64 - 0 - +63
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when the vibrato delay setting is configured.
Receive Receipt changes the time it takes until note vibrato starts.
10.25 Drawbar Position 1’(4EH)(Drawbar tone selected)
Note : This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format: BnH 4DH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “35.10 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar 1’ is operated.
Receive Receipt changes the drawbar 1’ position.
10.26 Drawbar Organ Type(4FH)(Drawbar tone selected)
Note : This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format: BnH 4FH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “35.11 Nor-
mal/Vintage Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send This message is not sent by this Instrument.
Receive Receipt changes the drawbar parameter type.
20