User manual - Midi Implimentation

Note1 : For information about the relationship between setting values and send/receive values, see the “35.11 Nor-
mal/Vintage Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send This message is not sent by this Instrument.
Receive Receipt changes the drawbar parameter type (CTK-7200, CTK-7300, WK-7600 only).
10.37 RPN (64H,65H)
Message Format: BnH 64H llH (LSB)
BnH 65H mmH (MSB)
n: MIDI Channel Number
ll: LSB Value
mm: MSB Value
10.37.1 Pitch Bend Sensitivity
Message Format: BnH 64H 00H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: MSB Value(00H - 18H)
ll: LSB Value(Send:00H, Receive:Ignored)
Send Sent when Bend Range of any part is changed.
Receive Receipt changes Bend Range of the corresponding part.
10.37.2 Fine Tune
Message Format: BnH 64H 01H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: MSB Value
ll: LSB Value
Send Sent when the fine tune of any part is changed.
Receive Receipt changes the fine tune of the corresponding part.
27