User`s guide

Using the Setup Menu
26
To initialize all menu settings
z Performing the procedure below will initialize all settings, except for the following setup
menu sub-menu items.
z Power on password on/off setting (Detailed Settings J Power On Password) and the
current password
z Language Setting (Detailed Settings J Advanced Settings 2 J Language)
z Lamp Time (Operational Info J Lamp Time)
1. Perform steps 1 through 6 under “Basic Setup Menu Operations” on
page 19. Select the “Operational Info” main menu, and then select the
“Restore All Defaults” sub-menu item.
2. Press the [ENTER] key.
z This displays a confirmation message asking if you want to initialize all settings.
3. Use the [S] and [T] keys to select [Yes].
4. Press the [ENTER] key to initialize all menu settings, or the [ESC] key
to exit the initialize operation without doing anything.
z Pressing the [ENTER] key will initialize all settings and information, except for the items
described under “Important!” above.