User Manual

10
Connect the YW-40 wireless adapter that comes with the projector to the projector’s USB-A port, as
shown in the illustration below.
If “On” is selected for “Plug and Play” on the setup menu, the operations describe below will be
performed when the wireless adapter is connected to the projector.
z If the wireless adapter is connected while projector power is turned on
Upon connection, the input source will switch to either “Wireless” (XJ-A Series) or “Network” (XJ-M
Series) and projection of the LAN connection standby screen will start automatically.
z If the wireless adapter is connected and then projector power is turned on
Starting up the projector will cause the input source to switch to either “Wireless” (XJ-A Series) or
“Network” (XJ-M Series) and projection of the LAN connection standby screen to start
automatically.
Important!
z Never try to use the wireless adapter that comes with the projector with any other type of
device.
Connecting the Wireless Adapter to the Projector
*
Caution
Keep the wireless adapter that comes with the projector out of the reach of
small children. Accidental swallowing of the adapter can interfere with proper
breathing and create a life-threatening situation.
XJ-A Series XJ-M Series
LAN Connection Standby Screen (Network Presentation System Screen)