User Manual

15
To use a projector generic SSID to establish a wireless LAN
connection and project
Projector Operation
1. Connect the wireless adapter to the projector (page 10) and then turn on the
projector.
z The input source will automatically switch to either “Wireless” (XJ-A Series) or “Network”
(XJ-M Series), and projection of the LAN connection standby screen will start.
z If projection of the LAN connection standby screen does not start, press the [INPUT] key. On
the “Input” dialog box that appears, use the [T] and [S] keys to select either “Wireless” (XJ-A
Series) or “Network” (XJ-M Series) and then press the [ENTER] key.
2. Press the [MENU] key and then select the following: “Network Settings” 3
“Projector Wireless LAN Settings” 3 “SSID”. On the dialog box that appears,
select one of the following: casiolpj0101, casiolpj0102, casiolpj0103, or
casiolpj0104.
z This operation is not necessary if you plan on using only one projector without changing the
initial default SSID setting (casiolpj0101). Advance to step 6.
3. Press the [ESC] key twice to return to “Network Settings”.
4. Use the [T] key to select “Update Network Settings” and then press the [ENTER]
key.
z This will display a confirmation dialog box asking if you want to update network settings.
5. Press the [S] key to select “Yes”, and then press the [ENTER] key.
z This applies the SSID change to the projector and closes the dialog box. Wait until the LAN
connection standby screen starts to be projected again.
z If multiple projectors are in use nearby, select a separate SSID for each projector.