User Manual

74
5. Click [Exit] to close the token wizard screen.
To use a USB token to connect a computer to the projector via
a wireless LAN
Connect the USB token to the computer’s USB port and then double click the Network Connection
icon in the token. After Network Connection starts up, you can perform the same operations you do
when Network Connection is installed on a computer.
Note
z You cannot use the token wizard when you start up Network Connection from a USB token.
Using the Network Connection to Project from a Mac OS
You can project the screen contents of a computer running a Mac OS (Mac OS X 10.6, 10.7, 10.8,
10.9) that is connected to the projector over a wireless LAN connection. The conditions below are
required in order to do so.
z On the projector, perform the required operation to change the projector’s SSID to a generic SSID
(casiolpj0101, casiolpj0102, casiolpj0103, casiolpj0104) or a user SSID. For more information, see
“To change the SSID” (page 49).
z Run Network Connection* on the Mac OS computer, and then log in to the projector from Network
Connection.
* You can download Network Connection for Mac OS from the CASIO projector support site located
at the URL shown below. The CASIO projector support site also includes information about required
computer environments and operation details.
http://www.casio-intl.com/support/
Projecting Via a Wireless LAN Connection with
Various Different Devices