User Manual

Projecting Computer Screen Contents Over a LAN

Connection

This section covers everything you need to know for establishing a LAN connection between the

projector and a computer, and projecting the computer’s display contents.

There are a number of different ways to establish a LAN connection between the projector and a

computer. The workflow below describes what you need to do to create a LAN connection.

Workflow from LAN Connection to Projection

Install Network Connection on the computer*

“Software Required to Use Network Functions” (page 8)

Establish a wireless LAN connection between the

projector and computer

Establish a wired LAN connection between the

projector and a computer (XJ-M Series only)

“Connecting the Wireless Adapter to the Projector” (page 10)

“Connecting the

Projector to a

Computer via a

Wired LAN (XJ-M

Series Only)”

(page 35)

z If you want to simplify the connection

process

z If you want to connect a computer

without connecting to an external

network (Internet or Intranet)*

z If you want to use an existing wireless

LAN access point (wireless router)

z If you want to connect a computer by

connecting to an external network

(Internet or Intranet)

“Establishing a Direct Wireless LAN

Connection between the Projector and a

Computer” (page 11)

“Establishing a Connection between the

Projector and Computer Via a Wireless LAN

Access Point” (page 29)*

“Using Network Connection” (page 39)

*1 After installing Network Connection on one computer, you can use the computer to create USB

tokens that can be used for LAN connection of other computers to the projector. For details, see

“Using the Token Wizard” (page 73).

*2 After establishing a direct wireless LAN connection between the projector and computer, the

computer will be able to connect with an outside network (Internet or Intranet) via the projector. For

more information, see “Connecting the Projector to an Outside Network without Terminating a

Direct Wireless LAN Connection with a Computer” (page 25).

*3 To connect this way, you need first to establish a direct LAN connection between the projector and

computer, and then configure settings to connect the projector to the wireless LAN access point.