User Manual
68
Image Input Specifies the input source. The following are the available input source
options.
3D Puts the projector into the 3D input mode or normal input mode.
On: 3D input mode
Off: Normal input mode
z Note that this setting cannot be change while the currently selected
input source is “Computer 1 (Component)”, “Computer 2
(Component)”, “HDMI”, or “USB”.
Color mode Specifies the color mode.
z For details about this setting, see “Selecting the Color Mode” (page
20).
Blank Selecting “On” for this setting temporarily blocks the image from the input
source. “Off” causes the image from the input source to be projected.
z The operation of this item is identical to that of the remote controller’s
[BLANK] key. For details, see “Momentarily Blanking the Image and
Muting the Audio” (page 21).
Aspect ratio Changes the aspect ratio of the projected image.
z For details about this setting, see “Changing the Aspect Ratio of the
Projected Image” (page 23).
Brightness This corresponds to the “Image Adjustment 1 J Brightness” setting of the
setup menu. Input a value into the box and then click the [Apply] button.
This will change the projector’s “Brightness” setting accordingly.
Contrast This corresponds to the “Image Adjustment 1 J Contrast” setting of the
setup menu. Input a value into the box and then click the [Apply] button.
This will change the projector’s “Contrast” setting accordingly.
Eco Mode Switches the Eco mode.
z For details about this setting, see “Eco Mode (Power Saving, Low
Noise)” (page 25).
Audio Volume Input a value into the box and then click the [Apply] button. This will
change the volume setting accordingly.
Mute Specifies the mute setting. Audio is output while “Off” is selected for this
setting, and muted when “On” is selected.
Audio Output Specifies either output from the projector’s speaker output or AUDIO OUT
terminal for audio.
Speaker: Audio output from the speaker
Line: Audio output from the AUDIO OUT terminal
Factory Defaults (Button) Clicking to return all Network Projection Control items, except for the
“Projector status” item, to their initial factory defaults.
Group Item Description
3D Off 3D On
Computer 1/2 (Auto) Computer 1/2 (RGB)
Computer 1/2 (RGB) Video
Computer 1/2 (Component) S-video
Video
S-video
HDMI
USB