User manual - A257_M256_UsersGuide

Projector operations are performed using the remote controller that comes with it. Point the remote

controller signal emitter at one of the signal receivers on the projector as you perform remote

controller key operations. The maximum range of the remote controller signal is approximately

5 meters (16.4 feet) (between signal emitter and receiver).

Important!

z To avoid running down the battery, store the remote control unit so its keys are not pressed

inadvertently.

Remote Controller

1 Remote control signal emitter

2 [P] (Power) key

Turns power on or off.

3 [INPUT] key

For changing the input source.

4 Keys for performing projection operations and for configuring

projector settings.

(Only XJ-A Series projectors have [ZOOM –], [ZOOM +],

[FOCUST], [FOCUSS] keys.)

5 These keys are used with USB models only. They are mainly

used for File Viewer (page 27) projection operations.