E DATA PROJECTOR XJ-H2600/XJ-H2650* * USB Port Models User’s Guide z Be sure to read the precautions in the Quick Start Guide that comes with the Data Projector. z Be sure to keep all user documentation handy for future reference. z To obtain the latest version of this manual visit the website at the URL below. http://world.casio.
z DLP is a registered trademark of Texas Instruments of the United States. z Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. z HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. z XGA is a registered trademark of IBM Corporation of the United States.
Contents About this manual... ...............................................................................5 Projector Overview ......................................................... 6 Projector Features and Main Functions .................................................6 Remote Controller and Projector Keys...................................................8 Back Terminals.......................................................................................9 Loading Remote Controller Batteries ....
Adjusting the Volume Level ..................................................................24 To adjust the volume level ......................................................................................... 24 To mute the audio...................................................................................................... 24 Eco Mode (Power Saving, Low Noise) .................................................25 To select the Eco Mode ..............................................................
Troubleshooting ............................................................ 51 Indicators..............................................................................................51 Error Indicators and Warning Messages ..............................................51 Projector Troubleshooting....................................................................54 Appendix ........................................................................ 56 Remote Controller Signal Range .........................
Projector Overview This section describes the features of the projector, and explains the functions of the projector and remote controller keys. Projector Features and Main Functions XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750/XJ-H2600/XJ-H2650/XJ-ST145/ XJ-ST155 z Mercury-free Hybrid Light Source: A CASIO-original laser and LED hybrid light source delivers high luminance from 2,500 to 4,000 lumens. This projector does not use a mercury lamp, making it environmentally friendly.
XJ-H1650/XJ-H1750/XJ-H2650/XJ-ST145/XJ-ST155 z Projection of Data from USB Memory or a Memory Card without a Computer*1: USB memory or a memory card (using a commercially available USB card reader) can be connected directly to the projector’s USB-A port. Special EZ-Converter FA software, which is available by download from the CASIO website, can be used to convert PowerPoint data to a format that is compatible with the projector.
Remote Controller and Projector Keys Operations in this manual are presented based on the remote controller that comes with the projector. Major operation keys are also provided on the projector unit, so the most of the same procedures can also be performed directly on the projector.
Back Terminals 1 7 2 3 4 5 6 8 9 bkbl bm bn bo bp bq br 1 USB-A port (XJ-H1650/XJ-H1750/XJ-H2650/XJ-ST145/XJ-ST155 only) 2 LAN port (XJ-H1650/XJ-H1750/XJ-H2650/XJ-ST145/XJ-ST155 only) 3 HDMI port 4 MONITOR OUT terminal 5 COMPUTER IN 1 terminal 6 COMPUTER IN 2 terminal 7 Remote control signal receiver 8 Power connector 9 SERIAL port*1 bk AUDIO OUT terminal bl Anti-theft lock hole bm AUDIO IN 1 terminal bn AUDIO IN 2 terminal bo AUDIO IN L/R terminals bp VIDEO terminal bq S-VIDEO terminal br USB-B port
Loading Remote Controller Batteries Important! Be sure to use alkaline batteries only. *Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 1. Open the battery cover on the back of the remote controller. 2. 3. Close the battery cover on the back of the remote controller. Load two new batteries into the case, making sure that their positive (+) and negative (–) ends are facing correctly.
Setup Precautions z Use a conveniently located power outlet that you can reach easily when you need to unplug the projector. z Do not allow any objects to be within the area indicated by the dashed line below, which is an area within 30cm (11.8 inches) of the projector. Keep all obstacles and other objects at least 30cm away from the projector’s vents.
Connecting to an Image Output Device Connecting the Analog RGB Output of a Computer to the Projector Connect the projector’s COMPUTER IN 1 or COMPUTER IN 2 terminal to the RGB terminal of a computer as shown in the illustration below. Important! z Always turn off the projector and the computer before connecting them. z Take care so the volume level of the computer is not set too high.
Connecting the HDMI Output of a Video Device or Computer to the Projector The projector supports projection and output of HDMI video and audio output from a computer or video device. Important! Turn off the projector and the computer or video device before connecting them.
Connecting to a Video Device The projector is able to project images from the composite video output, S-video output, or component video output of a connected video device. Important! Always turn off the projector and the video device before connecting them.
Connection to a component video output Projector Video device Component video cable (commercially available) COMPUTER IN 1 terminal AUDIO IN 1 terminal To component video output terminals To audio output terminals COMPUTER IN 2 terminal White Red AUDIO IN 2 terminal Stereo mini plug Ù Pin plug type audio cable (commercially available) z Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr.
Operation During Projection Selecting the Input Source Turning on the projector initially causes the same input source that was selected the last time it was turned off to be selected. To select a different input source 1. Press the [INPUT] key. z This displays the input source selection screen. 2. Select either the Normal Input Mode or 3D Input Mode depending on the type of image you want to project. z For details, see “3D Input Mode” (page 17). 3.
3D Input Mode Your projector supports projection of 3D images. To project a 3D image, first enter the projector’s 3D input mode, and then select the input source. Important! z Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in 3D. z Separately available special software (CASIO 3D Converter) is required to project a 3D image with the projector when a computer (analog RGB) is the input source.
Returning to the Normal Input Mode from the 3D Input Mode 1. Press the [INPUT] key to display the input source selection screen. 2. Use the [T] and [S] keys to move the highlighting to “To normal input mode” and then press the [ENTER] key. z This enters the normal input mode and closes the input source selection screen. Horizontal Flipping in the 3D Input Mode In side-by-side 3D, a full frame consists of two halves on the left and right for each eye.
Image Operations During Projection You can perform the following operations while projecting an image.
Selecting the Color Mode You can select from among various different color mode settings in accordance with image contents and projection conditions. Important! z The color mode cannot be selected in the following cases. z When “Off” is selected for the Eco Mode setting (page 25) z When the projector is in the 3D input mode. See “3D Input Mode” (page 17). z The color mode cannot be selected while “On” is selected for the setup menu “Option Settings 2 J Interactive Pointer” setting.
Momentarily Blanking the Image and Muting the Audio 1. Press the [BLANK] key. z This temporarily blanks the image (projecting a black screen) and mutes the audio. 2. To resume normal image and sound, press the [BLANK] key (or [ESC] key). Note You can specify projection of a black screen, a blue screen, a logo screen, or a custom logo screen. For details, see “Blank Screen” (page 42) under “Screen Settings Main Menu”. Freezing an Image Pressing the [FREEZE] key freezes the projected image.
Displaying a Pointer in the Projected Image You can select from among different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image. Note Depending on the pointer style you are using, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to change the keystone correction value to zero.
Changing the Aspect Ratio of the Projected Image Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image. Available settings depend on your projector model as shown below. For details about the meaning of each setting, see “Aspect Ratio” (page 41) under “Screen Settings Main Menu”. XJ-H2600/XJ-H2650 Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as shown below.
Adjusting the Volume Level You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker or the AUDIO OUT terminal. To adjust the volume level 1. Press the [VOLUME] key. z This causes the [Volume] screen to appear on the projected image. 2. Press the [X] key to increase the volume, or the [W] key to lower the volume. 3. After the setting is the way you want, press the [ESC] key. z This causes the [Volume] screen to disappear.
Eco Mode (Power Saving, Low Noise) The following three Eco Mode settings are available to specify whether priority should be given to low-power, low-noise operation or to projection brightness. On (Auto) : A brightness sensor on the top of the projector senses surrounding light, and automatically adjusts projection brightness and color accordingly. Brightness is reduced for darker surroundings, which saves power and reduces operation noise.
Note z While “Off” is selected for the Eco Mode setting, you also can specify whether brightness or color should be given emphasis. For details, see “Eco Off Mode” (page 39) under “Image Adjustment 1 Main Menu”. z (for USB port model users) Use the setup menu (page 27) to select the Eco Mode when the input source is an external device connected to the USB-A port. Using the [FUNC] Key Pressing the [FUNC] key displays the menu shown below. You can use this menu to perform the operations described below.
Configuring Advanced Projector Settings Your projector has a setup menu that you can use to configure advanced settings. Basic Setup Menu Operations Displaying the Setup Menu Pressing the [MENU] key displays the menu shown below in the center of the projection screen. Main menu Pressing the [MENU] key displays the main menu. The currently selected menu item is the one that is highlighted. Sub-menu The sub-menu shows each individual setting under each main menu item, and its current setting.
Basic Setup Menu Example The procedure below shows how to configure the following three settings: z Image Adjustment 1 J Contrast z Image Adjustment 1 J Color Mode z Input Settings J Signal Name Indicator Note z The setup menu items that you can change depend on whether or not an image signal is being input to the projector, and on the currently selected input source. Perform the procedure below after starting projection of an image from an input source in the normal input mode.
To configure the “Image Adjustment 1 J Color Mode” setting 5. Use the [T] key to select “Color Mode”. 6. Press the [ENTER] key. z This displays the color mode menu. 7. Use the [T] and [S] keys to select the color mode you want, and then press the [ENTER] key. 8. After selecting the color mode you want, press the [ESC] key. To configure the “Input Settings J Signal Name Indicator” setting 9. Press the [ESC] key. 10. Use the [T] key to select “Input Settings”. 11. Press the [ENTER] key. 12.
Custom Logo Capture You can capture a projected screen and save it as image data in the projector’s built-in memory. Image data you save in projector memory is called a custom logo. The following are ways you could use a custom logo.
Supported Capture Images Not all types of projection images are supported. Note the following precautions that correspond to each specific input source. Input Source Precautions RGB Use an image with a resolution no greater than 1280 × 800. You will not be able to execute the screen capture operation if the projected image has a resolution larger than this. Video, S-video Any closed captioning included in the projected image is not included in the captured image.
Password Protection The operations described below can be password protected on the projector. You can have only one password assigned to the projector at any time, and the same password is used for operations. z Projector startup protection The projector can be configured so a dialog box prompting input of the password is displayed whenever the projector is turned on. In this case, further operation of the projector is not possible unless the correct password is input.
If you forget your password... If you forget the password, you will need to bring the following two items to your CASIO distributor to have the password cleared. Note that you will be charged to have the password cleared. 1. Personal identification (original or copy of your driver’s license, employee I.D., etc.) 2. Projector unit Note that your CASIO distributor will not be able to clear the password of your projector unless you bring both of the items listed above.
8. After entering the new password, press the [ENTER] key. z This will display a dialog box prompting you to enter the same password again. 9. Re-enter the same password key sequence you entered in step 7 and then press the [ENTER] key. z The message “Your new password has been registered.” indicates that the password has been changed. Press the [ESC] key. z If the password you entered in this step is different from the one you entered in step 7, the message “The password you input is wrong.” appears.
Control Panel Lock Control panel lock disables (locks) all of the projectors keys, except for the [P] (Power) key. This limits projector operation to the remote controller, which protects against inadvertent mis-operation. To lock the control panel 1. Press the [MENU] key to display the setup menu. 2. Use the [T] key to select “Option Settings 2”, and then press the [ENTER] key. 3. Use the [T] key to select “Control Panel Lock” and then press the [ENTER] key. 4. Use the [W] key to select “On”. 5.
Restoring Projector Settings to Their Initial Factory Defaults You can use the procedures in this section to restore all of the settings on a particular main menu or all of the settings on the setup menu to their initial factory defaults. To restore all settings on a particular main menu to their initial factory defaults 1. Press the [MENU] key to display the setup menu. 2. Use the [T] and [S] keys to select the main menu whose settings you want to restore to their initial factory defaults.
To restore all settings on the setup menu to their initial factory defaults 1. Press the [MENU] key to display the setup menu. 2. Use the [T] key to select “Restore All Defaults” and then press the [ENTER] key. 3. After confirming that “Restore All Defaults” sub-menu is selected, press the [ENTER] key. z This displays a confirmation message asking if you want to initialize all settings. 4. Use the [S] key to select “Yes”. 5.
Setup Menu Contents This section contains tables that provide detailed explanations of all of the items included on the setup menu. The following describes the type of information that appears in each of the columns of the tables. Setting Name: This column shows the names of the settings as they appear on the sub-menu. Input: This column shows the input source for which each setting is supported.
Setting Name Input Setting Unit Description Color Mode RCV HDU Source Specific You can select from among various different color mode settings in accordance with image contents and projection conditions. Standard: Use this setting when you want to highlight the colors of your presentation. Graphics: Use this setting when you want photographs and graphics to appear natural. Theater: Use this setting to bring out the dark portions of your images.
Image Adjustment 2 Main Menu Setting Name Input Setting Unit Description Vertical Position RCV Signal Specific Use this sub-menu to adjust the vertical position of the input source image within the projection area. Horizontal Position RCV Signal Specific Use this sub-menu to adjust the horizontal position of the input source image within the projection area.
Screen Settings Main Menu Setting Name Input Setting Unit Description Keystone Correction R C V H D U N Single Use this sub-menu to perform vertical keystone correction of the projected image. Aspect Ratio RCV HD Use this sub-menu to select an aspect ratio setting for the projected image. Source Specific Input Source: RGB or HDMI (PC) Normal*: Projects at the projector’s maximum possible size while maintaining the input signal aspect ratio.
Setting Name Input Setting Unit Description Projection Mode R C V H D U N Single Use this sub-menu to specify whether projection will be from the front of the screen or the back of the screen. Front*: Select this option to project from the front of the screen. Rear: Select this option to project from the back of the screen. This setting flips the front projected image horizontally.
Setting Name Restore Menu Defaults Input Setting Unit R C V H D U N Source Specific Description Use this sub-menu to return all of the sub-menu items on the Screen Settings main menu to their initial default settings. z Restoring menu defaults when there is no input signal will restore defaults for the currently selected input source.
Setting Name Input Setting Unit Description Signal Name Indicator R C V H D U N Single Use this sub-menu to specify whether or not the name of the currently selected signal source should be displayed in the projected image. On*: Select this option to turn on display of the name of the currently selected signal source in the projected image. Off: Select this option to turn off display of the signal source name.
Setting Name Input Setting Unit Auto Power Off R C V H D U N Single Description Auto Power Off lets you specify the amount of time of projector operation and input signal inactivity to be allowed before Auto Power Off is triggered to turn off projector power automatically. Auto Power Off can be disabled, if you want. 5 min, 10 min*, 15 min, 20 min, 30 min: Time until Auto Power off is triggered. Off: Disables Auto Power Off.
Option Settings 2 Main Menu Setting Name Input Setting Unit Description Pointer R C V H D U N Single Use this sub-menu to specify the type of pointer that appears first when you press the [POINTER] key. Plug and Play (USB port models only) R C V H D U N Single Use this sub-menu to turn plug-and-play on or off. On*: Select this option to turn on plug-and-play. This will allow the projector detect when an external USB device is connected and make that device the input source automatically.
Setting Name Standby RGB/ Audio Input Setting Unit R C V H D U N Single Description Use this sub-menu to configure the projector for output of the video signal from the COMPUTER IN 1 terminal to the MONITOR OUT terminal, and output of the audio signal from the AUDIO IN 1 terminal to the AUDIO OUT terminal while the projector is in standby (projector off with power being supplied). Output: Select this setting to output video and audio signals while the projector is in standby.
Wired LAN Settings Main Menu (USB Port Models Only) Setting Name Remote on Input Setting Unit R C V H D U N Single Description Specifies whether the projector can be turned on via wired LAN while the projector is in standby (projector off with power being supplied). Enable: Power on enabled. Disable*: Power on disabled. Important! Performing an “Initialize Network Settings” operation or “Restore All Defaults” operation with the setup menu will cause this setting to change to “Disable”.
Operational Info Main Menu Setting Name Input Setting Unit Description Input Signal R C V H D U N Source Specific This sub-menu item shows the currently selected input signal (RGB, Component, Video, S-video, HDMI (PC), or HDMI (DTV)). “- - - -” is indicated here when there is no input signal. Signal Name RCV HDU Source Specific This sub-menu item shows the signal name of the signal being input to the projector. For details about signal names, see “Signal Name” under “Supported Signals” (page 62).
Cleaning the Projector Periodically clean the projector exterior, lens, intake vents, and intake-exhaust vents on a regular basis. Important! Before cleaning the projector, be sure to unplug it from the power outlet and make sure it is cooled down completely. Cleaning the Projector Exterior Wipe the exterior of the projector with a soft cloth that has been moistened in a weak solution of water and a mild neutral detergent. Be sure to wring all excess moisture from the cloth before wiping.
Troubleshooting Indicators Indicators keep you informed about the current operational status of the projector. The following shows what the indicators look like when operation is normal. When the indicators appear like this: POWER/ STANDBY LIGHT TEMP It means this: You have just plugged the AC power cord into a power outlet. Wait until the projector enters the standby state (see below) before trying to turn on power.
Indicator/Error Message POWER : Amber flashing J Amber steady LIGHT :– TEMP :– Message : Internal temperature is too high. The projector will turn off. POWER : Amber flashing J Red steady LIGHT : Red steady TEMP : Red steady Message : There is a problem with the fan. The projector will turn off. POWER : Amber flashing J Red steady LIGHT :– TEMP : Red steady Message : A system problem has occurred. The projector will turn off.
Indicator/Error Message POWER : Amber flashing J Red steady LIGHT :– TEMP : Red steady Message :– POWER : Amber flashing J Red steady LIGHT : Red flashing (0.5-second interval) TEMP : Red flashing (0.
Projector Troubleshooting Check the following items whenever you experience any problem with the projector. Problem Cause and Recommended Action Power does not turn on. z If the POWER/STANDBY indicator is not lit, the AC power cord is not connected correctly. Connect the AC power cord correctly. z If the TEMP or LIGHT indicator remains flashing or lit, it means some type of error has occurred. See “Error Indicators and Warning Messages” (page 51).
Problem Cause and Recommended Action Text is blurry. z The image may be out of focus. Rotate the focus ring to focus. z The current frequency and/or phase setting do not match the input signal. (Applies only when the input source is an RGB signal.) Press the [AUTO] key to execute an automatic adjustment operation. z On the setup menu, perform the “Image Adjustment 2 J Frequency” and “Image Adjustment 2 J Phase” adjustments. (Applies only when the input source is an RGB signal.) See page 40.
Appendix Remote Controller Signal Range When performing an operation on the remote controller, point it at the remote control signal receiver on the back or front of the projector. The following illustration shows the range of the remote controller signal. ±30 degrees max. 5 meters (16.4 feet) max. ±30 degrees max. 5 meters (16.4 feet) max. Front Back 5 degrees to 30 degrees ±30 degrees max. 5 meters (16.4 feet) max. 5 meters (16.4 feet) max.
Using the MONITOR OUT Terminal The MONITOR OUT terminal of the projector outputs the video signal being input via the COMPUTER IN 1 terminal or COMPUTER IN 2 terminal as-is. This makes it possible to simultaneously output the projection image to another display. Note z The signals output from the MONITOR OUT terminal and speaker (or AUDIO OUT terminal)*1 when the projector is turned on depends on the selected input source as shown in the table below.
Hanging the Projector from a Ceiling The projector can be hung from a ceiling. When doing so, the projector should be turned upside down, and secured to the ceiling. You also need to install a safety wire to ensure that the projector cannot fall accidentally. To attach the safety wire, remove the sticker on the bottom of the projector and attach the wire there. For full details, contact the retailer where you purchased the projector.
Projection Distance and Screen Size h* The following table shows the relationship between the distance and projected image size. XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750 Projection Size XJ-ST145/XJ-ST155 Approximate Projection Distance Approximate Projection h* Distance (cm / inch) (m / feet) Diagonal (cm) 27 69 0.85/2.79 1.0/3.28 0 45 114 0.6/1.97 6/2.36 40 102 1.3/4.27 1.6/5.25 0 60 152 0.8/2.62 8/3.15 60 152 1.9/6.23 2.3/7.55 0 80 203 1.1/3.61 10/3.94 80 203 2.6/8.53 3.
Aspect Ratio Setting and Projection Image The following shows how images are projected in accordance with the type of the input signal and the aspect ratio setting of the projector.
XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750/XJ-ST145/XJ-ST155 Input source: RGB or HDMI (PC) Input Signal Normal Full SVGA (800 × 600) XGA (1024 × 768) WXGA (1280 × 800) SXGA (1280 × 1024) Input source: Video, S-video, component or HDMI (DTV) Input Signal Normal 16:9 4:3 Aspect Image Squeezed Image Letter Box Image 61
Supported Signals Important! Even if a signal is listed in the table below, it does not guarantee that you will be able to display its images correctly. RGB Signal VESA Signal Name Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 × 480/60 640 × 480 31.5 60 640 × 480/72 640 × 480 37.9 73 640 × 480/75 640 × 480 37.5 75 640 × 480/85 640 × 480 43.3 85 800 × 600/56 800 × 600 35.2 56 800 × 600/60 800 × 600 37.9 60 800 × 600/72 800 × 600 48.
Component Signal HDTV SDTV Signal Name Horizontal Frequency (kHz) Vertical Frequency (Hz) 1080p/50 56.3 50 1080p/60 67.5 60 720p/50 37.5 50 720p/60 45.0 60 1080i/50 28.1 50 1080i/60 33.7 60 576p/50 31.3 50 576i/50 16.6 50 480p/60 31.5 60 480i/60 15.7 60 Video Signal, S-video Signal Signal Name Horizontal Frequency (kHz) Vertical Frequency (Hz) NTSC 15.7 60 NTSC4.43 15.7 60 PAL 15.6 50 PAL-M 15.7 60 PAL-N 15.6 50 PAL60 15.7 60 SECAM 15.
HDMI Signal Signal Name Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 × 480/60 31.5 60 800 × 600/60 37.9 60 1024 × 768/60 48.4 60 1280 × 768/60 47.8 60 1280 × 800/60 49.7 60 1280 × 960/60 60 60 1280 × 1024/60 64 60 1400 × 1050/60 65.3 60 SDTV (480p) 31.5 60 SDTV (576p) 31.25 50 HDTV (720p) (50) 37.5 50 HDTV (720p) (60) 45 60 HDTV (1080i) (50) 28.13 50 HDTV (1080i) (60) 33.75 60 HDTV (1080p) (50) 56.25 50 HDTV (1080p) (60) 67.
Using Wired LAN to Control the Projector (XJ-H1650, XJ-H1750, XJ-H2650, XJ-ST145, XJ-ST155) The projector can be controlled by a computer or other external device by connecting the device to the projector’s LAN port. Supported External Devices This projector supports all commands of PJLink Class1 (Version 1.00). http://pjlink.jbmia.or.jp/english/ This projector is supported by the commands of the Crestron Electronics controller and software (RoomView®). http://www.crestron.
2. Look up the projector’s IP address. z Perform the following steps to look up the projector’s current IP address. 1. Press the [MENU] key to display the setup menu. 2. Use the [T] and [S] keys to select “Wired LAN settings” and then press the [ENTER] key. 3. Use the [T] and [S] keys to select “Wired LAN info” and then press the [ENTER] key. 3. On the computer, start up a Web browser. 4. In the Web browser address bar, input the projector’s IP address and then press the [Enter] key.
To control the projector using Network Projection Control 1. Depending on the type of LAN connection you are using, perform either of the following operations to display the top page of the projector’s System Admin page. : “To establish a wired LAN connection between the projector and a computer” (page 65) Wireless LAN Connection : Steps 1 and 2 under “To log in to the projector’s System Admin page” of the “Wireless Function Guide” Wired LAN Connection 2. Click “System Admin”.
Group Image Item Input Description Specifies the input source. The following are the available input source options. 3D Off 3D On Computer 1/2 (Auto) Computer 1/2 (RGB) Computer 1/2 (RGB) Video Computer 1/2 (Component) S-video Video S-video HDMI USB Audio 3D Puts the projector into the 3D input mode or normal input mode.
5. After all of the settings are the way you want, click “Logout”. Note The “Status”, “Setup”, “Change Password”, and “Restore Factory Defaults” items along the left side of the screen are mainly for accessing information and configuring settings related to projector wireless LAN connection. You can access these items when connected over a wired LAN as well. For details, see “System Admin Page Operations and Settings” in the “Wireless Function Guide”.
Projector RS-232C Control You can use a commercially available serial cable (cross) to connect the projector to a computer and control the projector from the computer. Connecting the Projector to a Computer Connect the projector to the computer as shown in the illustration below.
z See the “Command List” for details about command names and settings. z All commands use ASCII characters and decimal format integers. z The projector will return a question mark (?) when it is sent a command it cannot recognize. Also, any command that attempts to set a value that is outside the applicable allowable range will be ignored.
Command Name RW Color Mode: Selects the color mode. PST RW 1: Graphics, 2: Theater, 3: Standard, 4: Blackboard, 5: Game Aspect Ratio: Specifies the aspect ratio. ARZ RW 0: Normal*1, 1: 16:9, 2: Normal*2, 3: Letter Box, 4: Full, 5: True, 6: 4:3 Get Light Time: Gets the light time from the projector.
Specifications Model Name XJ-H2600 XJ-H2650 Brightness (ANSI Lumens) 3500 Projection System DLP chip Projection Lens DLP Size: 0.65 inch, Number of Pixels: WXGA (1280 × 800) 1.2X manual optical zoom, manual focus Light Source Laser and LED Terminals COMPUTER IN: RGB 15-pin mini D-Sub × 2 (Also used as component signal input terminal.) MONITOR OUT: RGB 15-pin mini D-Sub × 1 VIDEO: RCA pin jack × 1 S-video: 4-pin mini DIN × 1 HDMI: HDMI type A terminal × 1 AUDIO IN: 3.
MA1205-B
