User Manual

3
and Information System Industries Association (JBMIA).
For detailed information about PJLink, visit the website below.
URL: http://pjlink.jbmia.or.jp/english
 The following shows input switching instruction and input switching query parameters and
their corresponding input sources.
Parameter
Input
Source
COMPUTER Terminal
Setting
Remarks
11
Computer
Auto
On the XJ-UT310WN, the input source is
Computer 1.
12
Computer
RGB
''
13
Computer
Component
''
14
Computer2
Auto
XJ-UT310WN only
15
Computer2
RGB
''
16
Computer2
Component
''
21
Video
22
S-video
31
HDMI
42
File Viewer
43
CASIO USB
Tool
44
Network
45
USB
Display
 Image only mute is not supported by the AV mute instruction and AV mute state query
 The cover open error and filter error are not supported by the error state query.
 A projector name query returns the projector name specified on the System Admin Page. For
information about the System Admin Page, see "To configure Control Panel page network
settings"" in your Projector's user's guide (Network Function Guide).
 A manufacturer name query returns CASIO.
 A device name query returns XJ-NP.
 The password used for the connection authentication process is the same as the System
Admin page password. The Projector can be configured to enable or disable authentication. To
do so, use [Network Settings]-[PJLINK Authentication] on the Projector's Setup Menu.
Eable: PJLink connection authentication enabled. (Initial default)
Disable: PJLink connection authentication disabled.
For information about the functions of other commands, see the PJLink specifications issued by
JBMIA.