User manual - UT310WN_NetworkGuide

On the “Enter the login code.” dialog box that appears, enter the login code.

z In the “Login Code” box, enter the four-digit number shown in the upper left corner of the LAN

connection standby screen that is being projected.

When everything is the way you want, click [OK].

z While the projector is connected to a computer over a wireless LAN, a Network Connection

window like the one shown below will be displayed on the computer screen. The computer

screen image (main screen) will be projected.

z For details about Network Connection window operations, see “Using Network Connection”

(page 39).

To terminate the wireless LAN connection and discontinue computer screen

projection, click the close button ( ) in the upper right corner of the Network

Connection window.

z This closes the Network Connection window and returns the projected image to the LAN

connection standby screen.

Note

z When using the above type of connection, settings can be configured to eliminate the need for

Panel page network settings” (page 59).