User manual - UT310WN_NetworkGuide

35
Wired LAN Connection Overview
The method you should use to connect the projector to a computer over a wired LAN depends on
whether or not the computer will also be connected to an outside network at the same time.
Wired LAN connection when it is not necessary to connect the computer to
an outside network
Use a LAN cable to connect the projector and computer, and configure IP address settings for both.
For information about how to do this, see “To use a LAN cable to connect a computer directly to the
projector” (page 36).
Wired LAN connection when you also want to connect the computer to an
outside network
Use LAN cables to connect the projector and computer to the same router. In this configuration, the
computer can use the network (Internet or intranet) service connected to by the router. The network
environment that can be connected to from the computer depends on the router.
For information about how to do this, see “To establish a wired LAN connection between the projector
and a computer via a router” (page 38).
Note
z The Network Connection application is not required for wired LAN connection operations.
Network Connection is used when projecting computer screen contents after a wired LAN
connection is established.
Connecting the Projector to a Computer via a Wired
LAN
Wired LAN connection
Router
Wired LAN connectionWired LAN connection