User Manual

17
To momentarily blank the image and mute the audio (BLANK)
1. Press the [BLANK] key.
 This blanks the screen by displaying the blank screen image specified by the Setup Menu
“Blank Screen” setting (page 28) and mutes the audio.
2. To resume normal image and sound, press the [BLANK] key (or [ESC] key).
To freeze an image (FREEZE)
Press the [FREEZE] key to freeze the current input source image. To return to the real-time input
source image, press the [FREEZE] key again or press the [ESC] key.
To auto adjust an image (AUTO)
Press the [AUTO] key.
 Pressing the [AUTO] key automatically adjusts the frequency and phase in accordance with the
input signal, which can reduce flickering and other projected image problems.
 This operation is supported while the input source is Computer (RGB).
To change the aspect ratio of the projected image (ASPECT)
Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image.
Available settings depend on your projector model as shown below.
XJ-V100W/XJ-V110W/XJ-F100W/XJ-F200WN/XJ-F210WN
Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as
shown below.
* XJ-F100W/XJ-F200WN/XJ-F210WN only
XJ-V10X/XJ-F10X/XJ-F20XN
Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as
shown below.
* XJ-F10X/XJ-F20XN only
Input Source Pressing the [ASPECT] key will cycle through these settings:
RGB, HDMI(PC) Normal  Full  16:9  4:3  True
Video*, S-Video*, Component, HDMI(DTV) Normal  16:9  16:10  4:3  Letter Box
Input Source Pressing the [ASPECT] key will toggle between these settings:
RGB, HDMI(PC) Normal  Full  16:9  16:10
Video*, S-Video*, Component, HDMI(DTV) Normal  16:9  16:10  4:3