User Manual

76
With an XJ-V Series projector, you can update firmware (software in the projector flash ROM) using a
computer. With an XJ-F Series projector, you can update firmware and also transfer images to the
projector to be used as a user logo.
For details about these operations, refer to the “Projector Firmware Update Guide” and “User Logo
Transfer Guide”, which are available for download from the CASIO projector website.
To update firmware and transfer a user logo
Use a commercially available USB cable to connect the projector’s SERVICE port (XJ-V Series
models) or LOGO port (XJ-F Series models) to your computer’s USB port.
Updating Firmware and Transferring a User Logo
SERVICE port
(Micro-USB Type B)
LOGO port
(Micro-USB Type B)
XJ-V Series XJ-F Series
F