User Manual

Connecting to a Computer
EN-23
MIDI is a standard for digital signals and connectors
that allows TRACKFORMER to exchange information
with a computing device.
• For details about MIDI settings, see “Entering the
MIDI Control Mode” on page EN-13, and “MIDI“
under “Configuring Other Settings” on page EN-17.
You can also edit tone, pattern, and other
TRACKFORMER data on a computer, where it is easier
to work with.
A special Data Editor application is required in order to
perform these operations.
1. Go to the CASIO WORLDWIDE site at the
following URL.
http://world.casio.com/
2. At the site, select a geographic area or
country.
3. After accessing the area site, navigate to the
minimum computer system requirements for
Data Editor for this product.
• You should be able to find a link to Data Editor
information on the product introduction page of this
product. If you cannot find such a link, use the search
form of the area site where you are located to enter
the model name of this product and search for it.
• Note that site contents are subject to change without
notice.
4. Check if your computer system complies with
the minimum requirements for Data Editor.
5. Download Data Editor and its user’s guide to
your computer.
6. Follow the procedure in the Data Editor user’s
guide you downloaded in step 5 to install
Data Editor.
7. Use the procedures in the Data Editor user’s
guide to transfer and edit data.
• See the Data Editor user’s guide for information
about the types of data that can be transferred and
the data that can be edited.
Using MIDI
What is MIDI?
Saving and Loading
TRACKFORMER Data to a
Computer and Editing
TRACKFORMER Data on a
Computer