Original Operating Manual Electric coffee machine with grinder Coffee Compact Item No.
CASO Design USA LLC 50 Mountain View Rd Waren, NJ, 07059 Info@CasoDesignUSA.com www.CasoDesignUSA.com T.: 908.604.0677 Document-Number: 11849 07-23-2018 Printing and typographical errors reserved.
1 Operating Manual .................................................................. 4 1.1 General ............................................................................................................ 4 1.2 Information on this manual ............................................................................ 4 1.3 Warning notices .............................................................................................. 4 1.4 Limitation of liability .....................................
1 Operating Manual 1.1 General Please read the information contained herein so that you can become familiar with your device quickly and take advantage of the full scope of its functions. Your Coffee Compact will serve you for many years if you handle it and care for it properly. We wish you a lot of pleasure in using it! 1.
1.4 Limitation of liability All the technical information, data and notices with regard to the installation, operation and care are completely up-to-date at the time of printing and are compiled to the best of our knowledge and belief, taking our past experience and findings into consideration. No claims can be derived from the information provided, the illustrations or descriptions in this manual.
2.2 General Safety information Please note Please observe the following general safety notices with regard to the safe handling of the device. ► Read all these instructions before using the appliance. ► Children shall not play with the appliance. ► Cleaning and user maintenance shall not be made by children. ► Keep the appliance and its power cable out of reach of children. ► Examine the device for any visible external damages prior to using it. Never put a damaged device into operation.
Please note ► Defective components must always be replaced with original replacement parts. Only such parts will guarantee that the safety requirements are fulfilled. ► For your own safety, only use manufacturer accessories and spare parts suited to your device. ► Check the grinding/brewing container for foreign objects before using the device. ► If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
2.3.2 Danger of burns Warning The water, heated in this coffee maker, the jug, the water tank as well as the warming plate, become very hot. Please observe the following safety notices in order not to burn or scald yourself or others. ► During coffee brewing, water tank, warming plate, jug (by incoming coffee) will become hot! Never touch the hot parts of the device! Take the jug only by the handle. ► Please always try the temperature of the coffee, before drinking.
► Transport, unpack and use two persons to set down the device because of the heavy weight of the device. 3.2 Delivery scope and transport inspection As a rule, the Coffee Compact is delivered with the following components: coffee compact coffee spoon jug filter lid of grinding/brewing container grinding/brewing container operating instructions Please note ► Examine the shipment for its completeness and for any visible damages.
The electrical socket must be easily accessible so that the power lead can be disconnected easily, in the case of an emergency. The installation and assembly of this device in non-stationary setup locations must be carried out by specialist companies / electricians, provided they guarantee the prerequisites for the safe use of this device. 3.
4.1 Overview 1 steam vent 2 lid of grinding/brewing container 3 filter 3a handle of the filter 4 blades of grinder 5 grinding/brewing container 6 drip stop 7 lid of water tank 8 scale of watertank 9 control dial with OFF, setting for ground coffee or coffee beans 10 start button 11 warming plate 12 jug 13 coffee spoon Disassembly of grinding/brewing container with filter and lid Press the button on the side of the lid of grinding/brewing container and lift the lid, to remove it.
Assembly of grinding/brewing container with filter and lid Place the grinding/brewing basket, until you a hear a click sound (1) turn it clockwise until the container latches. Take the filter at its handle (A) and place it a position B into the grinding/brewing container. Place the lid of grinding/brewing container, observe that the water tube C is placed into the water inlet D, and press the lid downwards until it latches.
Fill fresh water into the water tank and turn control dial on position . Press start button. The device will start working and the circuit of the device is rinsed through. When the start button stops flashing then turn the control dial to OFF. Pour out the hot water. Warning ► The blades of the grinder are sharp, do not touch them. Be careful when emptying the grinding/brewing container and during cleaning. 4.3 Making Coffee Warning ► Warning symbol: hot steam. ► Caution hot steam can escape at device.
Place the jug on the warming plate, tilt it slightly when you place it. Plug into outlet, you can hear an acoustic signal, the device is in standby mode. Turn the control dial to desired setting (1). You can hear an acoustic signal, then press start button (2). You can hear another acoustic signal, the start button is illuminated and flashes, the device will start to work. The device will brew coffee until the water tank is empty.
5.1 Safety information Attention Please observe the following safety notices, before you commence with cleaning the device: ► The device must be cleaned at regular intervals and calcium deposits should be removed. ► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet. ► The water tank, filter, jug and grinding/brewing container are hot after their use. Wait until the device has cooled down. ► Do not use any aggressive or abrasive cleaning agents or solvents.
5.3 Descaling The device has to be descaled regularly, otherwise the coffee taste will be affected and the scale deposits can damage the device. When the noise during brewing increases, or the brewing time is longer, or the device switches off before the water tank is empty, then these are indications that descaling is necessary. The frequency of descaling depends on the water hardness and how often the device is used.
6.1 Causes and rectification of faults Problem Possible solution Coffee brews too slowly (more than 10 minutes). Descale the device (see chapter descaling) The device switches off before water tank is empty. Clean the grinding/brewing container and drip stop valve of coffee residue. The drip stop does not work Clean the valve under running water and press the drip stop carefully several times. Water leaks out of the device. Do not fill the water tank beyond the max level.
If these were put in the non-recyclable waste or were handled incorrectly, they could be detrimental to human health and the environment. Therefore, do not put your old device into the non-recyclable waste under any circumstances. Please note ► Utilise the collection point, established in your town, to return and recycle old electric and electronic devices. If necessary, contact your town hall, local refuse collection service or your dealer for information.
Caso Design USA disclaims all other warranties, conditions, or representations, express implied, statutory or otherwise. Caso Design USA shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.