Instructions / Assembly

Fill fresh water into the water tank and turn control dial on position .
Press start button. The device will start working and the circuit of the device is rinsed
through. When the start button stops flashing then turn the control dial to OFF. Pour out
the hot water.
Warning
► The blades of the grinder are sharp, do not touch them. Be careful when emptying the
grinding/brewing container and during cleaning.
4.3 Making Coffee
Warning
► Warning symbol: hot steam.
► Caution hot steam can escape at device. Risk of burns.
Open the lid of the brewing/grinding container. Fill the
desired amount of coffee beans or ground coffee into the
filter (A), look at amount indication (B).
Replace the lid of grinding/brewing container.
Warning
► Do not open the lid of grinding/brewing container during
use. Danger of burns!
► Do not fill the grinding/brewing container above max-
marking, otherwise the device cannot work properly
► If device is not working correctly then pull the plug and wait at least 10 minutes before
you open the lid of grinding/brewing container.
Please note
► Attention! Ensure that coffee beans/ground coffee do not
fall into the water inlet.
Open the lid of the water tank (D).
Fill desired amount of water into the
water tank (according to the scale).
Close the lid of the water tank.