Instructions / Assembly

► Transport, unpack and use two persons to set down the device because of the heavy
weight of the device.
3.2 Delivery scope and transport inspection
As a rule, the Coffee Compact is delivered with the following components:
 coffee compact  jug  filter  grinding/brewing container
 coffee spoon lid of grinding/brewing container  operating instructions
Please note
► Examine the shipment for its completeness and for any visible damages.
Please note
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.
3.3 Unpacking
To unpack the device, proceed as follows:
 Remove the device out of the carton and remove the packaging material.
3.4 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging materials are
selected in accordance with environmentally compatible and recycling-related points of view and
can therefore be recycled. Returning the packaging back to the material loop saves raw materials
and reduces the quantities of accumulated waste. Take any packaging materials that are no longer
required to “Green Dot” recycling collection points for disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.
3.5 Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
 Only use this device on a flat, stable, heat-resistant surface away from water splashes
and any heat sources.
 Never use the device outdoors and always place in a dry environment.
 Choose the setup location in such a way that children cannot reach any hot surfaces on
the device.  Do not set up the device in a hot, wet or extremely damp
environment or near flammable material.