Use and Care Manual

caso Slow Juicer 10
4.2 Assembling
Please note
► The rubber sheet must be inserted into the bottom of the material barrel before use, and
pulled out before cleaning. See the picture below.
1. Put the material barrel at the fixed point of the host and keep it steady (see Figure 1).
2. Install the screw propeller at the middle of the material barrel and slightly press it
downwards (see Figure 2).
3. Place the filter screen into the screw propeller, install it at the middle of the material
barrel and rotate to the clip (see Figure 3).
4. Install the lock cover on the material barrel. Aligning to the unlocking symbol, and
follow the direction of arrow to rotate it to the locking symbol (see Figure 4).
Please note
► Disassembly should be done in reverse.
1 2 3
4 5 6