Technical data

Operation and Handling
caso Inno Slide 2100 55
15.4 Operating the Appliance
15.4.1 Using the Touch Controls
• The controls respond to touch, so you don’t need to apply
any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there
is no object (e.g. a utensil or a cloth) covering them. Even a
thin film of water may make the controls difficult to operate.
15.4.2 Switching Off
The complete appliance is switched off using the Master
On/Standby switch (1).
Please note
► Note that the appliance’s fan continues to operate for a while
after the appliance has been switched off in order to dissipate the
heat that has built up in the appliance.
15.4.3 Switching On
Press the Master On/Standby switch (1), the keys light up
“- - - -” and an acoustic signal sounds. Now the device is in
standby mode.
Place a suitable cooking pot with its contents to be cooked on the
centre on the hob (Ø 120 mm - 260 mm).
15.4.4 Power Stage
Press the selection key +/- (2) as long as necessary to select
the power stage (Indicator lamp showing correct power stage).
With the + / - Keys (2) or the Slider (6), you can change
the settings at any time in a range from 1 – 9.