Technical data

Operation and Handling
caso Master E3 60
Buzzer will bips for 30 seconds and the timer indicator
shows “--- “ when the setting time finished.
15.4.6 Setting the timer to turn one cooking zone
If the timer is set on one zone:
Touch the heating zone selection control that you want to
set the timer for.
Touch timer control, the timer indicator will start flashing
and will show”0:10”in the minute display.
Set the time by touching the”-“ or “+”control
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the minute display flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
When cooking timer expires, the corresponding cooking
zone will be switch off automatically.
Please note
► During timer operation, you can change the duration at any
time with the + / - keys (2) or the slide Control (3). With the
memory function of the device, the power stage remain
unchanged here.
► During the cooking process the power level and timer can be
readjusted as you wish.