Technical data

Operation and Handling
caso Master P3 56
15.4.5 Temperature Mode
Press the selection key >> (6) as long as necessary to select
the temperature mode (Indicator lamp temperature (4)).
The preset temperature stage "120" is selected and the device
turns on.
With the + / - keys (7+8), you can change the settings at any
time in a range from 60 – 240 °C. (Temperature stages: 60, 80,
100, 120, 140, 160, 180, 200, 220 and 240°C)
Please note
► In case of grilling or cooking deep fry food we would advise
you to use the function “Temperature” as in this case you can
use temperatures up to 240°C. Otherwise the overheating
protection “E05” will be activated.
15.4.6 Timer
After the selection of the temperature mode press selection
key >> (6) until the corresponding control lamps (5) lights up.
The display shows the number "0". With the + / - keys (7+8),
you can now select the operating time in 1-minute intervals (up
to max. 180 minutes).
Once the time is up, an acoustic signal sounds and the device
automatically goes into standby mode.
Please note
► During timer operation, you can change the duration at any
time with the + / - keys (7/8). With the memory function of
the device, the power stage or temperature settings remain
unchanged here.
► During the cooking process the temperature, power level and
timer can be readjusted as you wish.
15.4.7 Lock function (children lock key)
Press the Lock key 10, all keys will be blocked except Master
ON/OFF (1), to avoid mal-operation. After locking, induction
hotplates continue to heat in the preset temperature or power
stage. Also the timer continues counting.