Technical data

Operating and Handling
caso Wine Master 43
15 Operation and Handing
This chapter provides you with important notices with regard to
operating the device.
15.1 Operating elements and displays
The device transmits the following signal sounds as an acoustic
feedback signal:
Please note
► Use the buttons and to set the temperature for the two
top shelves in the range of 3-22°C.
► Temperature recommendations: Red wine: 12°C – 16°C and
white wine 6°C – 10°C.
► The display indicates the average temperature of the
appliance at the moment.
► When working both up and down zone, setting temperature
of upper zone must lower than down zone.
If you press the power button of :
• Upper zone -> both zones are switched on
• Down zone -> only down zone starts working
You can set the temperature as your desire by pressing the
button. There are three press-button on the panel “ ” and “ ” to
adjust the temperature by 1°C among 3-22°C.
You can tune the interior light on or off by pressing the “Light”
button.
Pushing the temperature key up and down for 5 seconds, then,
temperature display mode will be exchange between °C and °F.
15.2 Rating plate
The rating plate with the connection and performance data can
be founded on the back of the device.