Owner Manual

CASO VC 300 13
3.6 Setup
3.6.1 Setup location requirements:
In order to ensure the safe and trouble-free operation of the
device, the setup location must fulfill the following prerequisites:
 The device must be set up on a solid, even, horizontal
surface capable of supporting the vacuum sealer and any
items to be vacuum-sealed.
 Select a setup location where children cannot reach the hot
sealing strip of the device.
 Do not set up the unit in a hot or damp environment or near
flammable material.
 To operate correctly, the unit requires sufficient air flow.
Leave at least 4 inches of space on all sides when setting up
the unit.
 Do not move the vacuum sealer when it is in operation.
 The electrical outlet must be easily accessible so that the
plug can be quickly disconnected in the case of an
emergency.
 The setup of this unit in non-stationary locations (e.g., boats,
airplanes, motor homes) must be carried out by a qualified
electrician, provided they guarantee the prerequisites for the
safe use of the unit.