Specifications

FP Configurator for TCPIP Administrator Utilities
6—7
2. To set the flag for capturing network traffic data during the boot up period,
click
Set boot capture
. And select Perform.
When you set this flag, FaxPress will capture the network traffic from the start
of the boot up procedure until the capture buffer is full. Capture buffer size is
set automatically as follows:
• 1 MB if the total memory size is 4 MB.
• 2 MB if the total memory size is 8 MB.
• 4 MB if the total memory size is 12 MB
• 6 MB if the total memory size is 16 MB
• 10 MB if the total memory size is 32 MB
3. To include the capture of broadcast packets, click
Include broadcast
packets
.
4. To capture network traffic during run time, click on the
Set RT Capture
box, and select
Perform
. FaxPress will capture the data until the buffer is
full.
a. You can designate the size of the buffer by changing the number in the
Buffer
box. Each digit represents a MB of buffer space.
b. To include the capture of broadcast packets, click
Include broadcast
packets
.
5. To dump the captured data to a file, click
Dump to File
.