CSE010-0164-00 Sidewinder SV4 Driver's Ed Guide

13
STEP 7: Now relax the trigger to the neutral position. The ESC will now “ring” four times and flash the
yellow LED rapidly to accept the neutral position.
After accepting the neutral position, the ESC will “ring” twice, flash all the LEDs, and the yellow LED will
illuminate. This is the arming tone and LED indication that the ESC IS NOW ARMED and the vehicle will
respond to throttle inputs from your transmitter.
From this point on, when you connect batteries and turn the switch on, the ESC will give the initialization
“ring” followed by battery cell count beeps (only in Auto-LiPo mode), and then after the arming delay the
ESC will “ring” twice, indicating it is ARMED and will respond to throttle application.
If you have problems calibrating your transmitter with the Castle ESC, please see the troubleshooting
guide on page 27, visit our www.castlecreations.com/FAQ, or contact our world class technical support
department via email or on the phone.