CSE010-0164-00 Sidewinder SV4 Driver's Ed Guide

29
to page 4 for recommended battery capacity and C ratings for use with Castle ESCs.
For NiCad/NiMH packs, use copper bars to connect cells rather than welded tabs.
Problem: My battery pack is plugged into the ESC and nothing is working - no steering and no
throttle.
Solution: Make sure the ESC’s RX wire is plugged into channel 2 on the receiver, and that it’s plugged in
with the correct orientation. Double check your solder connections on the battery plug, and make sure the
battery is charged.
For more troubleshooting tips visit www.castlecreations.com/FAQ