CSE010-0164-00 Sidewinder SV4 Driver's Ed Guide

available within the computer programming of the transmitter. Please start by zeroing out any throttle trim

that you may have set in your transmitter.

How To Calibrate The ESC

Safety First! Remove the pinion prior to calibration.

Step 1: Start with the transmitter ON, the battery disconnected, and the ESC switch in the OFF position (if

your ESC has a switch).

Step 2: Plug a battery into the ESC. If your ESC does not have a switch, hold full throttle on your transmitter

before plugging in the battery.

Step 3: Hold full throttle on the transmitter and turn the ESC switch ON. Keep holding full throttle on the

transmitter. If all your connections are correct, you will hear one multi-toned initialization “ring” from the

motor (all sounds are played by the ESC vibrating the motor).