CSE010-0164-00 Sidewinder SV4 Driver's Ed Guide

22
Reject options unless you wish to change that specific setting. As an example, say you want to adjust the
Drag Brake to 20%. Work through the settings and options, rejecting all options until you get to 4 beeps,
meaning setting 4 (Drag Brake), followed by 3 beeps, meaning option 3 (20%). Select this option by going
to full throttle. Once you have changed the setting you want, you can unplug power from the ESC to get
out of programming mode. You do not need to finish all of the settings. The ESC will store your changes
until you change them again.
The next section of the manual gives a description of each of the settings and options and what to expect
when you change an option from default.
There is a reference guide on the last page of this manual.
1. Brake/Reverse Type
Sets whether reverse is enabled or not, and exactly how it can be accessed.
Option 1: With Reverse (Default)
This setting allows the use of reverse only after the ESC senses the vehicle has come to a stop. Use it for