User Manual

How To…
8.50
Rebuilding Cylinder
The cylinders have several rings and gaskets that help maintain pressure within the cylinder itself.
Over time these seals can become worn or damaged and may need to be replaced. Refer to the parts
explosion and corresponding list below for specific part identification.
This procedure requires two people.
SOLUTION STEPS:
1. Turn off the air and remove the airline for the cylinder to be removed/rebuilt. The line is
connected to the cylinder by a push-in fitting. Simply push the outer ring in as you pull the airline.
3. Loosen the tension screw on the side of the cylinder bracket

Summary of content (5 pages)