Operator Manual User guide

Table of Contents
Customer Promise_______________ Page 1
Safety Notification_______________ Page 1
Introduction
Definition of Terms_______________________ 2
Operating Features and Controls_____________ 3
Manual Contents Notice___________________ 5
Safety
Types of Warnings_______________________ 6
General Safety Rules_____________________ 6
Machine Inventory_______________ Page 8
Electrical and Air Requirements____ Page 8
Set Up and Installation____________ Page 9
Initial Configuration ______________ Page11
Adjustments
Router Feed Rate _________________________ 13
Pocket Web _____________________________ 14
Pocket Depth Position__________________ ___ 15
Drill Feed Rate __________________________ 16
Pilot Drill Depth _________________________ 17
Pilot Drill Height ________________________ 18
Operation______________________ Page 19
Service and Maintenance
Tool Changes____________________________ 21
Machine Maintenance_____________________ 23
Motors and Bits_______________________ ___ 24
Troubleshooting
Dry Cycle Test __________________________ 26
Safety Switch ___________________________ 28
Foot Switch ____________________________ 29
Pressure Regulator _______________________ 30
Router Stop Switch ______________________ 31
Drill Stop Switch ________________________ 32
Warranty & Returns ______________ Page 33