User Manual

Wireless 802.11g MiniPCI Card
WM1260
Installation Manual
System Requirements
Software (supports the following operating systems):
o
Windows XP
o
Windows XP SP1
o
Windows 2000
o
Windows ME
o
Windows 98SE
Hardware:
o
Minimum configuration: Pentium 300 MHz, 128 MB RAM
Hardware Installation
For Window XP and Window 2000
Follow the steps below to install the WM1260 in your computer first.
1. Turn off the notebook PC.
2. Find the MiniPCI slot and open the cover.
3.
Insert the WM1260 into the MiniPCI slot. Make sure the WM1260 contacts are fully seated in
the MiniPCI slot.
4.
Attach the antenna to the WM1260.
5.
Cap the cover and power on the notebook PC.
For Window ME and Window 98
WARNING : Setup must be run before the hardware is inserted into the system.