CASTLES TECHNOLOGY UPT1000B, UPT1000B-LCNF POS Terminal Book 2 User Manual UPT1000B Version 1.9 Apr 2022 CRT-U1-04-27-V1.9-FCC-PTCRB Castles Technology Co., Ltd. 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan R.O.C. https://www.castlestech.
WARNING Information in this document is subject to change without prior notice. No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd. All trademarks mentioned are proprietary of their respective owners. Castles Technology Co., Ltd.
Revision History Version Date 1.0 2020.02.13 Initial creation. Jeffrey 1.1 2020.02.24 Modify for certification Jeffrey 1.2 2020.03.18 Add “Safety Warning for Power Source” Jeffrey 1.3 2020.03.19 Modify the temperature of the power source Jeffrey 1.4 2020.05.06 Modify the "LED" to “Contactless LED Indicator” 1.5 2021.08.03 Add Canada IC Caution John 1.6 2021.09.15 Add External antenna statement John 1.7 2021.09.17 Replace External antenna statement with John 1.8 2022.01.
Contents 1. Introduction .................................................................................................................. 5 2. Hardware Setup............................................................................................................ 6 2.1. Parts of the UPT1000B ........................................................................................ 6 3. Program manager ...................................................................................................
1. Introduction This document provides a guideline on operating and configuring Castles UPT1000B. The scope of this document includes setting up the UPT1000B, basic operation, application life cycle, and some advance features. Castles Technology Co., Ltd. All Right Reserved. Pg.
2. Hardware Setup 2.1. Parts of the UPT1000B Front View Contactless LED Indicator MSR LED Indicator 2.8”Touch Screen MSR Contactless Reader Proximity Sensor ICC Reader LED Indicator Castles Technology Co., Ltd. Bill Acceptor All Right Reserved. Pg.
Rear View SIM SAM COM USB Port Power BT Antenna GSM Antenna Castles Technology Co., Ltd. All Right Reserved. Pg.
3. Program manager The UPT1000B is the terminal without keypad. Please follow the steps below to connect PC and UPT1000B for controlling. ▪ Power on UPT1000B and connect COM Port to PC. COM Port ▪ Run the application program such as “TeraTerm” or “PuTTY” on PC. ▪ Select “Serial port” to set the com port. The baud rate should be set to “115200”. ▪ Press any key on keyboard to refresh screen if doesn’t show “Program Manager” on “Tera Term” or PuTTY“. Castles Technology Co., Ltd. All Right Reserved.
Once the power is on in normal status, UPT1000B will enter Program Manager if no default application selected. All user applications are listed in Program Manager. User can select an application and run the application, view the application info, delete the application, or set application to the default one to run once the power is on. Users may enter System Menu to configure UPT1000B settings. Program Manager Program Manager -----------01/02 1.App1 2.
▪ Press [OK] button to run application. ▪ Press [ ↑ ] or [↓] as the up and down button to select application. System Menu Page 1 Page 2 System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share obj Mng System Menu 1.Embedded TMS 2.Font Mng 3.Debug Tools 4.ULD KEY HASH 5.HW Detect 6.Bluetooth Setup 7.Plug-in Mng 8.Key Injection 9.TP Calibration 0:Download 0:Download Page 3 System Menu 1.
4. Appendix 4.1. FCC Warning Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4.2. Safety Warning for Power Source Warining 1. Warning: Power cord shall be connected to a socket-outlet with earthing connection. 2. The equipment is intended to be supplied by external power source (UL listed/ IEC 609501/ IEC 62368-1) which output complies with SELV, LPS, output rating 9-48Vdc, min. 1.50.5A, ambient temperature min. 65°C. 3. Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose of expended battery in accordance with local disposal regulations. Attention 1.
4.3. Industry Canada statement This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
Antenna Type Antenna Connector Antenna Gain (dBi) Dipole SMA R/A PLUG WCDMA Band 2 WCDMA Band 4 WCDMA Band 5 LTE Band 2 LTE Band 4 LTE Band 5 LTE Band 12 LTE Band 13 LTE Band 14 LTE Band 66 Brand Model Aristotle RFA-US-T1000G-2M-A5 0.7 0.7 1 0.7 0.7 1 2 2 2 0.7 ~ END ~ Castles Technology Co., Ltd. All Right Reserved. Pg.
