User's Manual

Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 67
6.1.2. SetupGDB
Access to GDB Setting Menu.
 Press [4] button to enter System Settings menu.
 Press [F3] button three times to GDB Setting Menu (page 4).
Change following settings:
 Set GDB Mode to Y (enable)
 Set GDB Timeout, the time that GDB server (on terminal) waits
for connection. Default is 60 seconds.
 Set GDB Channel, the communication channel between GDB
server (on terminal) and SDK IDE on PC.
‘E’ indicates to use TCP/IP channel
‘U’ indicates USB mode
 Set Ethernet IP & Port, terminal IP address and GDB server (on
terminal) port. Ifcoummincation channel is set to TCP/IP.
 Press [] button to select setting.
 Press [OK] button to change the setting value.
 Press [] button to toggle Y  N  Y.
System Menu
1.Download AP
2.System Info
3.Memory Status
4.Sys Settings
5.Test Utility
6.Factory Reset
7.Power Off
SYS SETTINGS
GDB Mode : N
GDB Timeout : X
GDB Channel : X
ETHER IP/PORT
F2:Prev Page
SYS SETTINGS
GDB Mode : Y
GDB Timeout: 60s
GDB Channel : E
ETHER IP/PORT
192.168.0.71
5000
F2:Prev Page
Change to
SYS SETTINGS
GDB Mode : N
GDB Timeout : X
GDB Channel : X
ETHER IP/PORT
F2:Prev Page