User's Manual

Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 70
Step 8: Select debugger as “gdbserver”.
Step 8:
Ethernet Channel:
Please input the terminal IP address andGDB port in the format “remote
HostIP:HostPort” on the “Target” editor.Andselect your application from
the “Project” combobox. When finishing, press‘OK’ button to connect
with the terminal.
USB Channel:
If using USB channel to debug, input port number in the format
“remote/dev/ttySn” on the“Target” editor. ‘n’ indicates comport number
minus 1. Forexample, if the PC port that the terminal connects with is
COM3, pleaseinput“remote /dev/ttyS2” on the “Target” editor.Andselect
your application from the “Project” combobox. When finishing, press‘OK’
button to connect with the terminal.