Safety Information

Section 9. Physical and chemical properties
Physical state
Melting point
Vapour pressure
Relative density
Vapour density
Solubility
Liquid.
Not available.
Not available.
Not available.
Odour
pH
Brown. [Light]
Colour
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Closed cup: 217°C (422.6°F) [Pensky-Martens.]
Not available.
Not available.
Viscosity
Not available.
Odour threshold
Partition coefficient: n-
octanol/water
Appearance
Boiling point
Not available.
Flammability (solid, gas)
Lower and upper explosive
(flammable) limits
Not available.
Decomposition temperature
Not available.
Not applicable. Based on - Physical state
Not available.
<1000 kg/m³ (<1 g/cm³) at 15°C
insoluble in water.
Kinematic: 76.35 mm
2
/s (76.35 cSt) at 40°C
Kinematic: 12.7 to 13.9 mm
2
/s (12.7 to 13.9 cSt) at 100°C
Not available.
Density
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
The product is stable.
Chemical stability
Incompatible materials
Possibility of hazardous
reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
Under normal conditions of storage and use, hazardous polymerisation will not
occur.
Reactivity
No specific test data available for this product. Refer to Conditions to avoid and
Incompatible materials for additional information.
Avoid all possible sources of ignition (spark or flame).
Reactive or incompatible with the following materials: oxidising materials.
Section 11. Toxicological information
Information on likely routes
of exposure
No known significant effects or critical hazards.
Eye contact
Aspiration hazard
Name
Result
Base oil - unspecified
ASPIRATION HAZARD - Category 1
Distillates (petroleum), hydrotreated heavy paraffinic
ASPIRATION HAZARD - Category 1
Information on toxicological effects
Routes of entry anticipated: Dermal, Inhalation.
Potential acute health effects
Product name
Date of issue
Page: 5/9
Castrol EDGE 0W-40 A3/B4
ENGLISH
(ENGLISH)
Product code
Version
3.02
Format
Language
Australia
467465-MY01
(Australia)
07/03/2018